Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks 1968-1973

CJ's Part Number: TCPFCOC7D1-V
CJ's Low Price:
$2,729.00
1480636800 57474
Earn 2729 RPM Points What's this?
Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks 1968-1973
Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks 1968-1973 Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks 1968-1973 Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks 1968-1973 Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks 1968-1973 Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks 1968-1973 Total Control Products Coilover Conversion Kit Front 1" Drop Shaft Quickset 1 Shocks 1968-1973
Total Control Products

Product Description

Total Control Products Front Coilover Conversion Kit with 1" Drop Shaft and Quickset 1 Shocks for all 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

Score this fully adjustable front coilover suspension system at CJ Pony Parts and enjoy the benefits of utilizing key factory mounting locations to greatly simplify the installation process today! With this new Total Control Products Front Coilover Conversion Kit with Quickset 1 Shocks and 1" Drop Shaft for all 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs, you’ll be getting high quality, performance level suspension components that will fix the poor geometry and improve the look and feel of the stock set up in your 1968-1973 Mustang. This front coilover kit is fully adjustable, making it perfect for anyone that cruises the street and also likes to let her wide open on the track!

Coilover Conversion Kit Includes:
- Pair of Single Adjustable Quickset 1 Coilover Shocks
- Your choice of 450lb, 500lb or 550lb Coil Springs
- Pair of Adjustable Upper Control Arms
- Pair of TrueCenter Lower Control Arms
- Pair of TrueCenter Adjustable Strut Rods
- Pair of 1” Drop Pivot Shafts
- All Necessary Mounting Hardware

The lightweight, billet-aluminum, single-adjustable VariShock coil-overs have 16-positions to adjust the softness or firmness of your ride where both bump and rebound are adjusted simultaneously. This Total Control Products Front Coilover Conversion Kit is designed to keep the tire contact patch flat on the road surface and control wheel movement without creating a harsh ride. These awesome coilovers will reduce body roll and pitch while helping to maintain precise control of the spindle position and the suspension travel arc. These American made VariShocks are constructed from only premium components, where each shock performs identically. Unlike other cheaper shocks, these are housed right inside of performance coilover springs for a great looking, compact design in any 1968, 1969, 1970, 1971, 1972 or 1973 Mustang.

The included Upper Control Arms are constructed from 1" x .156" wall steel tubing and feature double adjustment couplers with an adjustment range of 1". The caster can be adjusted within 6 degrees and camber can be adjusted within 5-1/2 degrees. Alloy-steel rod ends contain low friction, polymer bearing races which help eliminate deflection and the increasing resistance found with typical rubber and polyurethane bushings. A four bolt ball joint has a relocated zerk fitting for easier access and shim sets are provided for alignment purposes.

TrueCenter Lower Control Arms improve suspension geometry by precisely controlling the ball joint travel arc. The inner bushing on the control arm features a spherical bearing with high strength polymer races which create a deflection free, low friction pivot point. This bearing setup can safely handle caster settings far beyond the ability of rubber or polyurethane bushings. A threaded retaining ring and locking set screw maintain bearing preload. These control arms are also constructed from 1-1/8" x .156" wall steel tubing, which is connected to the 1-1/4" shank socket housing by an overlapping robotic spray-arc welded joint. The ball joint plates and mid-plates are made from 1/4" steel which eliminate deflection at the spindle and OEM positioned sway bar attachment points.

TrueCenter Strut Rods maintain correct suspension geometry without the increased resistance found with rubber and polyurethane bushings. Caster adjustment can be changed 3 to 4 degrees depending on the specific application. Also, up to 12 degrees of misalignment is available in any direction which allows the strut rod to rotate beyond the limits of a standard rod end. A low friction pivot center with zero deflection is achieved with the use of high strength, non-compressible polymer bearing races. The strut rod is constructed from 1" x .156" wall steel tubing with a large crimped end that is robotic spray-arc welded to a 5/16" steel control arm adapter plate with an integrated steering stop.

With this awesome, new Total Control Products Front Coilover Conversion Kit with Quickset 1 Shocks and 1" Drop Shaft for all 1968-1973 Mustangs you’ll immediately see and feel the difference in the way your Mustang rides, handles, maneuvers and performs! Order yours today from CJ Pony Parts and enjoy the fully adjustable VariShocks and superb quality coil overs that work in perfect harmony with new upper and lower control arms to give you a versatile, top notch feeling and functioning suspension!

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 144.71ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Can this kit be bought without the 1 inch drop shaft, and do you only offer the 500 and 550 spring rates?

Asked by: Scott S
  • 2016-10-19T07:47CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_TCPFCOC7D1-V, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 158.46ms
  • QUESTIONS, PRODUCT

You Might Also Like