Total Control Products Full-Length Subframe Clip for 1965-1966 Mustangs with a Tubular Sway Bar and 5.0L Coyote Engine Mounts.
If your plan is to swap a 5.0L Coyote engine into your 1965-1966 Ford Mustang then you need to consider this direct-fit (TCP KCST1-2) Total Control Products Full-Length Subframe Clip. This is designed for high-performance applications and will even delete the factory shock towers, creating additional space under the hood for your new engine. This factory-welded subframe clip also includes a g-Machine double A-arm, rack and pinion crossmember.
Features and Benefits:
- Extra Room in Engine Compartment
- Stronger Than Factory Frame Rails
- Interlocking Slot Tab Technology
- Factory-Welded Full-Length Subframe Clip
- G-Machine Double A-Arm, Rack and Pinion Crossmember
- Shock Tower Delete Panels
*Does NOT include a sway bar but does have mounts on the frame for a tubular sway bar.
*Does NOT include engine mounts but does have frame mounts for 5.0L Coyote engine mounts.
Please Note: The Total Control Products Subframe Clips will require the use of Total Control Products Front Suspension Components. Other brand suspension components will Not work on this Total Control Products Front Clip.
This (TCP KCST1-2) factory-welded full-length subframe clip is ideal for Mustang builds packing a lot of power. This subframe clip has fully boxed rails with heavier wall thickness than stock, offering improved rigidity. This subframe clip extends the entire length of the front frame rails.
The included recessed-pocket steel shock tower delete panels will clear up space under the hood of your 1965-1966 Mustang for your 5.0L Coyote engine. For your convenience, the panel edges are pre-drilled for rosette welding to stock inner fenders.
The included crossmember has a bent-tube, billet-component design. It is a totally closed, firm structure with greater strength and resistance bending and twisting than other crossmembers. Composed of steel tubing, there are large-radius mandrel bends at each side that will distribute loads throughout the crossmember. This will eliminate fatigue points at critical areas. Additionally, slots for the billet-mount tabs are machined in a horizontal machining center with dedicated fixturing to ensure proper component geometry that will in turn ensure a proper functioning suspension.
Self-fixturing female slots used with machined male tabs provide an interlocking assembly method that enables A-arm, rack and pinion, and shock mounts to be accurately positioned in all axes. This will ensure that your suspension will properly perform. Non-interlocking designs are not nearly as accurate after welding. The premium spray-arc welding process utilized on this product creates the best weld penetration with excellent appearance.
Purchase this Total Control Products Full-Length Subframe Clip for your 1965-1966 Mustang with a Tubular Sway Bar and 5.0L Coyote Engine Mounts from CJ Pony Parts today!
Product ReviewsWrite a review
Hi - I have a '66 coupe. coilover front suspension from StreetorTrack, 12' Wilwood disk brakes, unisteer rack and pinion, tko 500 & a tired 289/271. I like the front clip idea rather than the shoehorn install for an aluminator. Can I use this on the clip
You Might Also Like
CJ's Low Price:$189.00