Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With 5.0L Coyote Engine Mounts 1967-1970

Total Control Products: TCP KCST2-2
CJ's Low Price:
$1,877.00
1480896000 64604
Add a suspension kit to your new subframe clip and get your Mustang one step closer to your performance goals!
Earn 1877 RPM Points What's this?
Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With 5.0L Coyote Engine Mounts 1967-1970
Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With 5.0L Coyote Engine Mounts 1967-1970 Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With 5.0L Coyote Engine Mounts 1967-1970 Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With 5.0L Coyote Engine Mounts 1967-1970 Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With 5.0L Coyote Engine Mounts 1967-1970 Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With 5.0L Coyote Engine Mounts 1967-1970 Total Control Products Subframe Clip Full-Length For Tubular Sway Bar With 5.0L Coyote Engine Mounts 1967-1970
Total Control Products

Product Description

Total Control Products Full-Length Subframe Clip for 1967, 1968, 1969 and 1970 Mustangs with a Tubular Sway Bar and 5.0L Coyote Engine Mounts.

Complete a 5.0L Coyote engine swap in your 1967-1970 Ford Mustang with this direct-fit (TCP KCST2-2) Total Control Products Full-Length Subframe Clip. This setup is designed for high-performance applications and will make your 5.0L Coyote engine swap much easier by deleting the factory shock towers, adding space under the hood. Also included with this factory-welded subframe clip is a g-Machine double A-arm, rack and pinion crossmember.

Product Includes:
- Factory-Welded Full-Length Subframe Clip
- G-Machine Double A-Arm, Rack and Pinion Crossmember
- Shock Tower Delete Panels

Features and Benefits:
- Extra Room in Engine Compartment
- Stronger Than Factory Frame Rails
- Interlocking Slot Tab Technology

*Does NOT include engine mounts but does have frame mounts for 5.0L Coyote engine mounts.
*Does NOT include a sway bar but does have mounts on the frame for a tubular sway bar.

Please Note: The Total Control Products Subframe Clips will require the use of Total Control Products Front Suspension Components. Other brand suspension components will Not work on this Total Control Products Front Clip.

This (TCP KCST2-2) factory-welded full-length subframe clip is ideal for Mustang builds packing a lot of power. This subframe clip has fully boxed rails with heavier wall thickness than stock, offering improved rigidity. This subframe clip extends the entire length of the front frame rails.

The included recessed-pocket steel shock tower delete panels will clear up space under the hood of your 1967-1970 Mustang for your 5.0L Coyote engine. For your convenience, the panel edges are pre-drilled for rosette welding to stock inner fenders.

The included crossmember has a bent-tube, billet-component design. It is a totally closed, firm structure with greater strength and resistance bending and twisting than other crossmembers. Composed of steel tubing, there are large-radius mandrel bends at each side that will distribute loads throughout the crossmember. This will eliminate fatigue points at critical areas. Additionally, slots for the billet-mount tabs are machined in a horizontal machining center with dedicated fixturing to ensure proper component geometry that will in turn ensure a proper functioning suspension.  

Self-fixturing female slots used with machined male tabs provide an interlocking assembly method that enables A-arm, rack and pinion, and shock mounts to be accurately positioned in all axes. This will ensure that your suspension will properly perform. Non-interlocking designs are not nearly as accurate after welding. The premium spray-arc welding process utilized on this product creates the best weld penetration with excellent appearance.

Order a Total Control Products Full-Length Subframe Clip for your 1967, 1968, 1969 or 1970 Mustang with a Tubular Sway Bar and 5.0L Coyote Engine Mounts from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Restomod Chassis Stiffening  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 92.09ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 258.07ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like