Trunk Filler Board 1965-1966

CJ's Part Number: TFB1
CJ's Low Price:
$6.99
1480809600 32319
Make sure you have the right screw set to properly install your new trunk filler board!
CJ's Low Price:
$2.99
Qty
Earn 6 RPM Points What's this?
Trunk Filler Board 1965-1966
Trunk Filler Board 1965-1966 Play Trunk Filler Board 1965-1966 Video 1

Product Description

Trunk Filler Board for all 1965-1966 Mustangs.

If the floor of your 1965-1966 Mustang's trunk looks like it's seen better days, this Trunk Filler Board can help! Made from fiber board and just like the original in every way, this filler board can help you spruce up your trunk with minimal effort.

Features & Benefits:
- Excellent Reproduction Filler Board that's Just Like the Original
- Made Out of Fiber Board
- Pre-Cut for Direct Installation in the Factory Location
- Fits the Driver Side

This Trunk Filler Board is the piece that covers the large opening on the driver side trunk floor, and it's an excellent reproduction that's just like the original in every way. To make the installation process even easier, the filler board comes pre-cut. It'll fit on the driver side of your Pony, and it's made out of fiber board.

Please Note: The passenger side does not require a filler board because the spare tire is mounted in that location.

Order a Trunk Filler Board for your 1965-1966 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Interior  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Trunk Filler Board 1965-1966 is rated 4.8 out of 5 by 5.
Rated 5 out of 5 by from filler board Its a filler board . What can I say but it fit good and it is thick and strong
Date published: 2015-07-01
Rated 5 out of 5 by from Perfect Fit! Was a perfect fit my my 65 convertible. Looks exactly like the stock one.
Date published: 2015-01-09
Rated 5 out of 5 by from fits great This is the cheaper one I believe but the quality was great.
Date published: 2015-01-16
Rated 4 out of 5 by from Great item Great item, but I did have to modify it a little bit at the "U" shaped indention to fit the wheel well house.
Date published: 2015-02-11
Rated 5 out of 5 by from A good visual appearance. This filler panel helped in the visual appearance within the trunk area.
Date published: 2016-06-12
  • y_2016, m_12, d_2, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_TFB1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 27.44ms
  • REVIEWS, PRODUCT

Product Questions

not sure where this is installed, looking for something like this that covers the back of the rear seat, when you open the trunk u see the back of the seat, itr would look so much better covered up.

Asked by: john daniel
hey john, what you're looking for is the back seat to trunk divider board. hope this helps
Answered by: skips stang
Date published: 2016-08-25
  • 2016-12-04T08:10CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_TFB1, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 317.49ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Trunk Filler Board 1965-1966 Video Transcript
By Bill Tumas: We’re here with a reproduction trunk filler board fitting your 1965 through 1966 Mustang. This is a reproduction of the original trunk filler board found in all 1965 through 1966 Mustangs. The trunk filler board is going to mount to the far driver's side of your trunk area and cover the opening down into the trunk drop off to give you a nice flat trunk. This is an accurate reproduction using the original press board material. This trunk filler board and other trunk restoration part for your '65 through '66 Mustang are available at cjponyparts.com.