Turbosmart Internal Wastegate Actuator 7 PSI Focus ST 2013-2016

Turbosmart: TS-0622-5072
MSRP: $204.99
CJ's Low Price:
1477094400 44075
Combine your wastegate actuator with these amazing performance parts from COBB!
CJ's Low Price:
CJ's Low Price:
Earn 184 RPM Points What's this?
Turbosmart Internal Wastegate Actuator 7 PSI Focus ST 2013-2016
Turbosmart Internal Wastegate Actuator 7 PSI Focus ST 2013-2016 Play Turbosmart Internal Wastegate Actuator 7 PSI Focus ST 2013-2016 Video 1

Product Description

Turbosmart 7 PSI Internal Wastegate Actuator for all 2013, 2014, 2015 and 2016 Focus STs.

Turbosmart's Internal Wastegate Actuator for the 2013-2016 Focus ST can handle a much larger range of springs compared to the stock wastegate. This allows the fitment of more robust and heavier duty springs. An aftermarket wastegate gives you much more control over boost pressure. Experience a boost curve that comes on faster and stays flat.

The Turbosmart actuator is less susceptible to exhaust back pressure so there is less drop-off at the end. With a Turbosmart IWG-75, you get more boost, earlier and it stays strong for longer than your stock wastegate actuator could ever hope to achieve. Swapping springs is extremely simple so you can achieve the desired amount of boost.

- Silicone diaphragm with Nomex reinforcement to withstand high temperatures
- High grade, billet aluminum construction
- Stainless steel rods and connecting clevis for corrosion resistance
- Locking Collar design cap allows for quick spring changes
- Range of springs from 3 to 26 psi base pressure

The Turbosmart Internal Wastegate Actuator is quickly becoming one of the hottest boost control products on the market. Turbosmart designed this wastegate like every other Turbosmart product. A perfect part comes from the highest quality materials and precision engineering which is what Turbosmart is known for. Internal wastegate actuators provide better turbo response and greater sensitivity when managing boost pressures. Each Turbosmart internal wastegate actuator is adjustable with several spring options and packaged in a kit form so they can be fitted as a direct bolt-on replacement for the factory wastegate.

Owners of turbocharged cars love the sound of their turbos and the additional power that it creates. However, if these owners leave the EcoBoost in factory condition, there's a lot of power and enjoyment left on the table. With the parts from Turbosmart, you can make some upgrades to your EcoBoost, quickly and easily getting a better sounding turbo and more power.

Order a Turbosmart 7 PSI Internal Wastegate Actuator for your 2013, 2014, 2015 or 2016 Focus ST from CJ Pony Parts today!

Similar Focus Parts

similar Focus parts More Blow Off Valves & Wastegates  

Installation Instructions

Mustang Installation

Focus Applications

This product will fit the following Ford Focus years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 179.95ms
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

Will this put unnecessary drain and wear on the turbo, I'm not looking to blow valves gasgets or worse major engine parts. It's my first turbo car and still learning about them.

Asked by: ST Will
It will not put any more stress on the turbo, It will actually better control the waste gate which is your engines way of keeping the boost in check.
Answered by: tom cjpp
Date published: 2016-05-05

Will this add any boost if I already have my ST tuned with the COBB accessport?

Asked by: ST90
This unit will not add any boost. However it will give better control over the waste gate allowing a quicker more precise release of the excess exhaust.  This will keep your engine from over boosting with an aftermarket tune that will add boost.
Answered by: tom cjpp
Date published: 2016-05-05

Will there be a video for this install? Is this is the site where I learn most of everything I've done to the car? 

Asked by: Cecil
Possibly, stay tuned.
Answered by: CJPP Dave
Date published: 2016-04-15
  • 2016-10-21T08:16CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_TS06225072, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.09ms

You Might Also Like

Product Video

Turbosmart Internal Wastegate Actuator 7 PSI Focus ST 2013-2016 Video Transcript
By Bill Tumas: We’re here with Turbosmart's 7 PSI internal wastegate fitting your 2013 through 2016 Focus ST. This internal wastegate from Turbosmart is an excellent choice for your 2013 through 2016 Focus ST if you're looking to turn up the boost and have more control over it. This is going to have a seven PSI base spring but will hold heavier springs ranging from three PSI all the way to 26 PSI base. This will give you a lot more boost control and allow your car to boost up a lot faster and have a much flatter boost curve. This particular wastegate does include a seven PSI spring. Other wastegates and other springs are available here on our website.