Set of 40 1/64" Upper Control Arm Shims for 1965-1966 Mustangs.Upper control arm shims are used to adjust caster and camber alignments on your Mustang. The shim is placed between the control arm and shock tower on the control arm studs. Shims are 1/64" thick to help deliver the perfect alignment settings.
Camber is adjusted by adding an even number of shims to both control arm studs. This pushes the top of the tire out and increases positive camber. Caster is adjusted by adding shims to just the front or rear of the control arm stud to push the tire forward or backwards.
Product ReviewsWrite a review
Upper Control Arm Shim Set 1/64" (40) 1965-1966 is rated out of 5 by 2.
Rated 2 out of 5 by chriss from not so good for me very skinny very hard to set upper control arm on 65 mustang
Date published: 2016-04-24
Rated 5 out of 5 by Mustang Doug from They work well I think they are a bit smaller than the originals however, I believe they work much better. They are also easier to work with.
Date published: 2015-05-02
You Might Also Like
CJ's Low Price:$9.99
CJ's Low Price:$89.96