V8 Ram Air Kit 1971-1973

CJ's Part Number: RAK1
MSRP: $668.94
CJ's Low Price:
$648.99
This item is a Kit A kit is comprised of multiple parts1410998400
Earn 648 RPM Points What's this?
RAK1
RAK1 Play V8 Ram Air Kit 1971-1973 Video 1

Product Description

INCLUDES PLENUM, DUCTS,


SEAL, AIR CLEANER, VACUUM
HOSE KIT AND ACTUATORS
SMALL BLOCK ONLY
WILL FIT 302, 351W AND 351C. MAY NOT WORK WITH FACTORY EGR SPACERS.

DOES NOT INCLUDE AIR FILTER.

Similar Mustang Parts

similar mustang parts More Mustang Shaker & Ram-Air Systems  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
mostly positive
The kit is close to the original as far as I can tell. The only complaints I have is that the sheetmetal around the wingnut hole was dented, I had to use a small hammer and anvil to get it straight. The snorkel bolt hole did not line up to the threaded lugs on the air filter housing, I had to grind almost a quarter of an inch out to get the bolt in. and lastly, the threaded lugs were not the same as the bolts provided, I had to tap them out to the "metric bolt" size that was supplied. Other than that, it does look original and looks good!
Omar Butzer September 13, 2014
1 Results

Product Video

By Bill Tumas: We're here with a Ram Air Kit for your '71 through '73 Mustang. The kit includes an original style Mustang ram air air cleaner box with the lid and a snorkel with the correct actuator. It includes the under hood plenum with the dual snorkels with the actuators already installed, as well as a seal that go from the air cleaner box to the plenum. All your vacuum lines are included, along with a vacuum diagram and all your installation hardware. Although we plan on a full installation of the ram air kit sometime in future, one of the more common questions we get is how to install the seal to the air box.

I want to show you how to do that real quick. The seal has this edge, as seen here. The way this seal ships, it's actually inside out. If you want to turn the seal inside out to install it ... and now that edge goes underneath this lip. You want to make sure it is all the way under or it will not hold in. It's best to pull the edge out and then flip it underneath. Make sure it is tucked all the way around. You're ready to install in your car. This Complete Ram Air Assembly for your '71 to '73 will fit all body styles. It does require the use of an original or reproduction NACA style hood.