Set of Velgen 20" x 9" and 20" x 10.5" Satin Bronze Classic5 Wheels for all 2015, 2016 and 2017 V6, EcoBoost and GT Mustangs.
Ensure that your 2015-2017 V6, EcoBoost or GT Mustang steals the show with this killer Satin Bronze Classic5 Wheel by Velgen. The exterior of your Mustang will be much improved after the installation of this set of four Velgen wheels. Available through CJ Pony Parts, the classic 5 spoke design of this wheel will surely not disappoint you.
As you may guess, the Velgen Classic5 wheel has a bold 5 spoke design with a beautiful satin bronze finish. The 5 spokes start with a thick base in the center of the wheel and taper out as they extend to the edge of the wheel. A recessed lip sits behind the spokes to give the wheel some depth and added design. The rear 10.5” Classic5 will feature the deepest concave out of the entire Velgen line up, with a mid-concave for the 9” fronts.
The 20" diameter wheel provides a large amount of clearance for big brake kits and has no problem fitting around factory 15" Brembo brakes. The Velgen wheel requires a metal hubcentric ring for installation. This ring is included with each wheel.
These Velgen Wheels also require small diameter lug nuts. Larger OEM style lug nuts will NOT work.
*Sold as a staggered 20x9 and 20x10.5 Set of Four Wheels.
Please Note: Due to the profile design of these wheels and the thickness of the outside lip, we do NOT recommend using a 275/35-20 Tire on the rear.
(2) 20" x 9" Fronts
|Center Caps:||(4) Included|
Tech Tip: This set of wheels are NOT intended for use with the 2015-2017 Shelby GT350 and GT350R.
Velgen manufactures their wheels using a low pressure casting process. This casting process uses positive pressure to push molten aluminum into the mold quicker. Low pressure casting improves the mechanical properties of the wheel for a denser finished product over gravity cast wheels. Low pressure casting has become one of the most common casting processes approved for wheels sold to the OEM market. While low pressure casting has a slightly higher production cost over gravity casting, the end result is a much higher quality product. Once the Classic5 wheel has been manufactured, Velgen puts the wheel through a variety of quality control tests that include radial testing, impact testing and fatigue testing.
*Valve stem TPMS compatible for all 2015-2017 V6, EcoBoost and GT Mustangs with a tire pressure sensor in each wheel.
*This 20" staggered wheel kit will clear all available brake kits found on any 2015-2017 V6, EcoBoost or GT Mustang.
ATTENTION: If you purchase matching tires for your new wheels, CJ Pony Parts offers mounting & balancing free of charge! It's as simple as choosing part TMB from the right-hand column to add it to your order.
Purchase a Set of Velgen 20" x 9" and 20" x 10.5" Satin Bronze Classic5 Wheels for your 2015, 2016 or 2017 V6, EcoBoost or GT Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$836.99
CJ's Low Price:$979.99
CJ's Low Price:$1,800.00
CJ's Low Price:$1,800.00
The fronts will clear brembo brakes and are a six point two six back spacing with a plus thirty-two millimeter off set. The rears have a seven point five two backspace with a plus forty-five and a nice concave look. All four wheels include the center caps and will require the use of a small diameter lug nut. The tire packages and other finishes for your Velgen Classic5 wheels are available at CJPonyParts.com.