Velgen 20" x 10.5" Matte Silver VMB8 Wheel for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.
The Mustang wheel market isn't very big outside the world of replica wheels unless you're looking to spend a few thousand for a custom set of wheels. Velgen Wheels is filling that void with their VMB8 style wheels.
This 20" x 10.5" VMB8 wheel has 8 spokes evenly spaced that complement the Mustang extremely well. An inset lip on each spoke gives the wheel race inspired looks. A slight lip sits just behind the spokes on the barrel. The aluminum monoblock wheels are cast, then sent through three CNC machining stages for a perfect finished product. This wheel is finished with a matte silver powder coat to go with almost any exterior Mustang theme. A stylish center cap features Velgen's name.
The 20" diameter wheel provides a large amount of clearance for big brake kits and has no problem fitting around factory 15" Brembo brakes. The Velgen wheel requires a metal hubcentric ring for installation. This ring is included with each wheel.
We found the 275/35-20 tires to be on the slightly skinny side ONLY on the 20x10.5" Velgen rear wheels. The Nitto INVO tire helps to cover and protect the wheel lip far better than the NT555 Tire. For a more aggressive fit we now offer the 295/35-20 Nitto INVO tires which offers a great fit on any 10.5" wheel but are slightly over an inch taller than the originals. This will require adjustment do your speedometer which can be done with the SCT's XCAL. This may also cause interference issues on cars that are extremely lowered. Correct centering of axle and proper adjustment to rear suspension geometry is a must if you choose to have the 295/35-20 Nitto INVO Rear Tires installed.
|Size:||20" x 10.5"|
This Velgen wheel requires small diameter, tuner style lug nuts (WHLLN7 and WHLLN8). Larger OEM style lug nuts will NOT work.
Available individually, as a staggered set of four wheels or a set with tires.
Like all Velgen wheels, the 20" x 10.5" VMB8 wheels are low pressure cast wheels. Low pressure casting uses positive pressure to move the molten aluminum into the mold quicker. This helps improve mechanical properties and achieve a finished product that is more dense than a gravity cast wheel. Low pressure casting is the most common process approved for aluminum wheels sold to the OEM market and it offers a good value for the aftermarket as well. Although low pressure casting has a slightly higher production cost over gravity casting, it allows for a higher quality product. After the VMB8 wheel is manufactured, it is put through a series of tests including radial testing, impact testing and fatigue testing. Velgen's quality control service ensures their wheels emerge with no imperfections.
Please Note: The 20" inch x 10.5" wheel is intended for use on the rear of your Mustang. Wider rear wheels have a deeper concave to enhance the look of a staggered setup.
*Valve stem TPMS compatible. All 2007 and newer Mustangs use tire pressure sensors in each wheel.
*This 20" wheel will clear the 14" Brembo brakes on 2007-2012 GT500s, 2010-2014 GTs and 2012-2013 Boss 302s as well as the 15" Brembo brakes on 2013-2014 GT500s.
*The staggered set of wheels comes with 20" x 9" front wheels with a +35mm offset.
One of the easiest ways to get the biggest visual impact from an upgrade to your 2005-2014 Mustang is by adding some new wheels from CJ Pony Parts. If you want to stray away from common replica style wheels, add a set of unique Velgen Wheels so your Mustang can be one of a kind. With the addition of matching tires, your Mustang can look amazing in no time!
Product ReviewsWrite a review
You Might Also Like
From:CJ's Low Price:$450.00
From:CJ's Low Price:$450.00
Once they're fully machined they're finished in powder coat and your choice of either the matte gun metal or the matte silver shown here. The wheels are then balanced before they're boxed up and shipped out to CJ Pony Parts. Velgen's so confident in the construction of their wheels they actually give you a five year full warranty and a lifetime structural warranty on all their wheels.
Let's take a closer look at one of the models. This is the Velgen VMB8. This is a great looking 8-spoke wheel available again in your choice to the matte gun metal or the matte silver finish. This is available in a 20 by 9 or a 20 by 10-1/2, the 10-1/2 having a nice concave dish to it. The Velgen wheels give your car a great look with the deep concave rears. Here you're going to see from the side shot just how deep the center is in the back.
All of our Velgen wheels are going to include the Hub Centric rings for installation and will require the use of a low pro lug nut to install properly on your Mustang. If you're looking for a great custom wheel for you late model Mustang, check out our complete selection of Velgen wheels.