Volante Dark Blue Reproduction Steering Wheel for 1965-1966 Mustangs with an Alternator.
After more than 40 years on the road, and nearly 50 in many cases, the interior of you 1965-1966 Mustang might need some attention. One of the items that you might want to replace first is the steering wheel. The steering wheel over time can become brittle and crack due to the different climate changes. So replace your damaged steering wheels for a high-quality Volante Reproduction Steering Wheel from CJ Pony Parts today!
- Fits 1965-1966 Mustangs
- Works with Alternator Charging Systems
- Constructed with Injected Molded Plastic
- OEM Style Replacement
- Factory Correct Colors
Please Note: This VolanteReproduction Steering Wheel will not work on 1964.5 Mustangs.
- Dark Blue
- Dark Red
- Light Blue
- Ivy Gold
With this steering wheel being a high-quality reproduction the fit and finish is identical to the original steering wheel. The 3-spoke Volante steering wheel is constructed from injected molded plastic. On the back of the steering wheel finger grips are evenly spaced around the whole steering wheel.
Mustang steering wheels can be the perfect upgrade for any classic Mustang. No matter what type of replacement you're looking for, CJ Pony Parts offers Mustang steering wheels to fit. Choose from Mustang steering wheels designed to match a factory restoration, or choose from Mustang steering wheels meant for the resto-mod audience and give your 1964-1973 Mustang's interior a much more modern feel.
Purchase a new Volante Reproduction Steering Wheel for your 1965 or 1966 Mustang with an Alternator from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$7.99
CJ's Low Price:$14.99
Our black plastic steering wheel is an exact reproduction of the original. The horn ring from Scott Drake we're going with has all the detail we've come to expect from their products; the correct paint in the circles, as well as the highly detailed paint in the Ford Mustang as well as the correct logo.
For this installation you'll need a steering wheel puller, 1/2-inch ratchet, short extension, 15/16th socket, 3/8 ratchet, 1/2-inch socket and an adjustable wrench.
See our original horn ring is in really rough shape. All the chrome's off the top here. It's flaking down here. The paint is falling off. Our wheel has this cheap plastic cover on it to cover up all the cracks. It's definitely time for an upgrade.
The first step is going to be to remove our original horn ring. ou'll disconnect your battery before you get started that way the horn's not going off as you remove it. To remove it you simply press in and turn. You'll want to make sure you grab the spring; you'll want to use that with our new pieces.
Now, you're going to remove the bolt that holds the wheel to the column. You'll want to hold the wheel and the wrench kind of at the same time to get it to come off.
At this point, you're most likely going to need a steering wheel puller. Sometimes the wheel may come off. Most times you'll need the puller. Ours isn't budging. We're going to use our steering wheel puller to get it out. We'll start by lining up the plate here. We'll put our screws through. These don't have to be threaded in all the way. You just want them in far enough to get a good grip on the wheel so we can pull it out.
Now we're ready to get our new steering wheel. You want to make sure that you have the wheel as centered as possible when you remove it and install the new one the same way. I'll line up our new wheel, press it down on the spring and put our retaining bolt back on. Now we'll tighten the retaining nut down and again hold the wheel while you turn the wrench. The new horn ring comes ready to install. You line up the three tabs from the retainer with these three openings here and make sure you install the original spring first. Push it flat and you'll feel it pop in, applying pressure, just turn and it'll lock in to place.
Now that our horn ring is installed, we will reconnect our battery to make sure our horn works; (honk honk) and check if the turn-signals cancel and our installation is finished.
Our new horn ring and steering wheel really freshened up the look of our interior. Installation should only take you about half an hour. You'll be back on the road in no time.