Wilwood 11.3" Dynalite 4-Piston Front Disc Brake Kit for 1965-1966 Mustangs with V8 Spindles and all 1967, 1968 and 1969 Mustangs.
Looking to upgrade the front brakes on your 1965-1966 Mustang with V8 Spindles or 1967-1969 Mustang? This front disc brake kit from Wilwood is an affordable upgrade, better than your original, unreliable brakes. This kit features four piston forged aluminum calipers and 11.30" diameter vented one-piece rotors. These classic series front disc brakes provide extra wheel clearance as well. This front disc brake kit from Wilwood allows you to use some 14" and 15" wheels and come in either a black or red powder coated finish.
- Black or Red Powder Coated Finish
- Complete Bolt-in Installation
- 5 Lug Conversion
- Fully Compatible With Manual or Power Assisted Systems
- Metallic-Composite Compound Brake Pads
- Vented Plain-Face Rotors
- Zero Installation Modifications
- Made in USA!
Wilwood's front disc brake kit will offer upgrade solutions for OEM drum or disc splindles. The forged Dynalite 4-piston calipers are designed to have one of the best wheel clearance in the market. The 4-piston calipers are constructed out of forged aluminum which helps against corrosion and reduces heat transfer. With this being a fixed caliper design, Wilwood’s front brake kit provides superior clamping power which decreases the stopping distance greatly. The intended vehicle application will conveniently require zero installation modifications for installation and clears most 14" OEM disc brake wheels.
- Pair of Caliper Brackets
- All Necessary Hardware
- Stainless Steel Braided Brake Lines
- Dust Caps
- Detailed Instructions
This one piece design rotor is precision machined for smoother engagement which provides for a long lasting rotor life even with heavy braking situations. The vented rotors dissipates the heat provided from the clamping force of the caliper.
Wilwood's Smart Pad brake pads feature a medium-friction compound with low noise and low dust of a street performance compound, plus the increased friction characteristics of a race compound brake pad. The smart brake pads have smooth engagement, with consistent response from a flat torque curve throughout their entire effective heat range.
Replacing brakes are a necessity of owning any Mustang. However, while they will always wear out, the brakes on your classic Mustang don't need to wear out as fast when you install well engineered, high performance braking components. With CJ Pony Parts now offering the latest selection of brakes from Wilwood, you can find these parts at some of the best prices around.
Order a Wilwood 11.3" Dynalite 4-Piston Front Disc Brake Kit for your 1965-1966 Mustang with V8 Spindles or 1967, 1968 or 1969 Mustang from CJ Pony Parts today!
Similar Mustang PartsMore 5-Lug Front Disc Brake Kits
Product ReviewsWrite a review
I have a 69 Mach 1 w manual drums and Magnum 500 wheels 15". Will the wheels fit, will it bolt to the drum spindles and can I use my existing master cylinder? Thanks James
will this kit fit my 1964 ford fairlane
The kit says it comes with braided brake lines and then it says pay extra for braided brake lines, so do they come with the kit or not?
I wish to install this kit on '68 Mustang with 4 drums / no booster. Keeping drums on the rear. I don't see the instructions mention any need for a proportioning valve. Please confirm this is correct. No prop. valve needed. Only current dist. block.
Do I need to upgrade to power brakes before I install these on my 68 Mustang Coupe?
I have a 68 mustang with a 200ci 6 cylinder. it currently has 4 lug drums so will I need to get new v8 spindles?
Id like to purchase this kit however my question is, if they don't offer replacement brake pads, would any brake pads for a 1966 fit on this kit from any auto parts store?
I would like to put front disc brakes on my 1968 Mustang. Is this all I need to switch over from drum brakes? And Do I need to buy a brake booster or can I still use the original master cylinder?
You Might Also Like
From:CJ's Low Price:$1,099.99
Wilwood Front Disc Brake Kit Dynalite 4-Piston Drilled and Slotted 11.3" V8 Spindles 1965-1966/1967-1969From:CJ's Low Price:$674.99
CJ's Low Price:$442.99
CJ's Low Price:$442.99
This Wilwood kit is a great and affordable way to convert your 65 through 69 Mustang to front disc brakes. It'll fit all 65 through 66’s with V8 spindles and will fit all 67 through 69 mustangs. The kit is going to include these Dynalite four piston aluminum calipers and available in a red powder coat shown here or as well as black. Powder coated mounting brackets as well as a hyper worn set of brake pads are also included. The Dynalite kit includes these 11.3 inch high performance vented rotors. These are going to be the same 5 lug bolt pattern and will be a direct replacement for the stock ones on your 65 through 69 Mustang. All necessary bearing seals, hardware as well as brake lines are all included. The low profile design of the Wilwood Dynalite kit will allow it to fit behind more 15” wheels and even some 14” wheels.
This USA made disc brake upgrade from Wilwood is an excellent choice for your 65 though 69 Mustang.