Wilwood 11.00" Dynapro 4-Piston Front Disc Brake Kit for 1965-1966 Mustangs with V8 Spindles and all 1967, 1968 and 1969 Mustangs.
Take your Mustangs brakes from barely working, to being one of the best stopping Mustangs on the block. This Dynapro Front Disc Brake kit converts your factory, unreliable drum or disc brakes to an upgraded 2-Piece 11.00" rotors with a pair of 4-Piston calipers. This Dynapro 4-Piston Front Disc Brake Kit will allow you to install some factory 15" wheels along with most aftermarket 15" wheels.
- Forged Dynapro Black or Red Powder Coated Calipers
- Caliper Mounting Brackets
- 11.00" 2-Piece Drilled and Slotted Rotors
- Aluminum Rotor Hats
- Set of Performance Brake Pads
- All Necessary Mounting Hardware
- Direct Bolt-on
- Increased Brake Capacity
- Ideal for Track and Street Use
- Designed for 15" or Larger Wheels
- Can Be Used with Manual or Power Brakes
Please Note: This Hub Offset (+.09” (2.286mm) will move the wheels inward or outward from the fender by this amount on each side of the vehicle.
Wilwood includes a pair of Drilled and Slotted 2-Piece Rotors that are 11.00" in diameter and feature a directional drilled and slotted vented rotor pattern. This drilled and slotted pattern improves the response of the brakes and brake pad performance. The venting and cleaning of the holes and slots will shrink pad glaze, releasing gasses and heat that is generated during heavy or light braking. The drilled and slots of the rotors also prevent irregular compound build-up that allows a smoother braking engagement and upgraded pedal response in any driving situation. This pair of rotors is finished in a black e-coat finish that prevents rust from occurring.
*This kit will require the purchase of additional brake lines.
The 2-piece 11.00" rotor hats are specially made from premium aluminum alloys for quality strength and attention to minimized weight. These hats have threaded rotor mount holes and produce consistently reliable outcomes even in the most difficult conditions. The rotor hats also come equipped with a black e-coat finish to help fight against rust and corrosion build up.
Order your Wilwood 11.00" Dynapro 4-Piston Front Disc Brake Kit for 1965-1966 Mustangs with V8 Spindles and all 1967, 1968 and 1969 Mustangs from CJ Pony Parts today!
Similar Mustang PartsMore 5-Lug Front Disc Brake Kits
Product ReviewsWrite a review
I have 67 stang and wanna replace the spindles as well , what spindle do i need to order for theae to work . Thanks
What is the recommended bore size for the master cylinder when using the Wilwood DBF205-V to replace front manual brakes and still keeping manual brakes for the rear?
What is the differance between the Dynalite and Dynapro 4 pistion 11 inch front brake kits? Are there any other parts needed to make this work on my 68 fastback?
the description says 4 piston the pictures are 6 six piston? In the previous question you said the difference between the dynalite to dynapro is the 4 and 6 piston calipers. So this kit is the dynapro so it should have 6 piston calipers?
You Might Also Like
CJ's Low Price:$1,131.24
Regular Price: $837.99
Special Price: $837.49
From:CJ's Low Price:$799.99