Wilwood 12.9" Black 4-Piston DynaPro Solid Drag Front Disc Brake Kit for 2015, 2016 and 2017 V6, EcoBoost and GT Mustangs.
Once you have built your 2015-2017 V6, EcoBoost or GT Mustang to go fast, you’re going to need to stop fast. What better way to bring all those ponies to a halt then with a Wilwood 12.9" Black 4-Piston DynaPro Solid Drag Front Disc Brake Kit from CJ Pony Parts! With significant weight savings from lightweight calipers and rotors, this brake kit was designed to deliver high torque stopping power that will greatly outperform stock brake components.
Wilwood Front DynaPro Solid Drag Brake Kit 140-14100-D Features:
- DynaPro 4 Piston Calipers
- Dynamic Mount Steel Rotors
- Optimal Thermal Resistance
- Caliper and Brackets Mount Directly to OE Spindle
- High-Response and Fade Resistant BP-20 SmartPads
- Premium, High-Strength Fasteners and Hardware
- Bolt-On Installation
This front brake kit from Wilwood features Dynamic mount steel rotors that provide a high resistance to thermal distortion with exceptional friction and wear characteristics. These lightweight rotors weigh only 5.7 pounds each. The brake hats are machined from premium alloys for optimal strength while minimalizing weight. Paired with the steel rotors, these brake hats provide solid and reliable braking performance. The rotors attach to the OE hubs with the hats using Wilwood’s T-nut mounting system, this system allows the rotor to move independently from the hat during heat cycles. This design will eliminate stress on the mounting points and reduce rotor distortion that can occur with fixed mount steel rotors. Another benefit of the dynamic mounting system is that it will ensure the brake pads fully release from the rotor, eliminating the brakes dragging down the track.
Wilwood’s narrow DynaPro 4R piston calipers provide versatile radial mounting with a sleek profile, superior strength and durability while only weighing in at 4.1 pounds. The DP4R calipers feature stainless steel pistons, stainless steel bridge wear plates, internal bore seals and e-clip style pad retaining pins for quick and easy access to the brake pads. With a combination of pure race technology and modern performance enhancements, these DynaPro calipers have become a favored choice among many motor sports. Combined with the BP-20 SmartPads, this brake setup will provide high response and holding power when cold, and be fade resistant when things start to heat up.
This Wilwood DynaPro brake kit will provide your Mustang with superior stopping power, and a significant decrease in weight compared to your stock brake components. The best part? All this braking performance simply mounts to the OE spindle and hub, making this kit a full bolt-on installation.
- Pair of Drilled Steel Rotors
- Pair of GT Series Flared Hats
- Pair of DynaPro 4R Calipers
- Pair of Caliper Brackets
- Set of BP-20 Compound Brake Pads
- All Necessary Hardware
Please Note: These brakes are configured for drag racing only and should not be used for street use. A minimum size of 17” wheels are required along with a stainless steel braided Flexline kit sold separately (CJ’s Part Number BHS58)
Replacing brakes are a necessity of owning any vehicle. However, while they will always wear out, the brakes on your Mustang don't need to wear out as fast when you install well engineered, high performance braking components, like those that are available from Wilwood. With CJ Pony Parts now offering the latest selection of brakes from Wilwood, you can find these parts at some of the best prices around.
Order this Wilwood 140-14100-D 12.9" Black 4-Piston DynaPro Solid Drag Front Disc Brake Kit for your 2015, 2016 or 2017 V6, EcoBoost or GT Mustang from CJ Pony Parts today!
Similar Mustang PartsMore 5-Lug Front Disc Brake Kits
Product ReviewsWrite a review
I have a 2016 V6 Mustang, and have been browsing braking system upgrades. Why are brakes that are configured for drag racing not recommended for street use?
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$1,558.05
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$999.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$198.99
The ultralight Dyno Pro four piston calipers come in a black finish, which matches the black finish on the rotors. These will fit your GT, V6, or EcoBoost. They will not work on the GT500.
Due to the lightweight 12.9 inch rotors, this kit will require the use of a 17 inch skinny on the front of your car. It also will not work with your factory break hose, will require the use of the Wilwood flex line break hose, which is also available at CJPonyparts.com.