Window Molding Clip Screw Set 1965

CJ's Part Number: HW375
CJ's Low Price:
1469577600 20091
Earn 4 RPM Points What's this?
Window Molding Clip Screw Set 1965
Window Molding Clip Screw Set 1965 Window Molding Clip Screw Set 1965 Play Window Molding Clip Screw Set 1965 Video 1

Product Description

Set of Window Molding Clip Screws for 1965 Mustangs.

Time to bring your Mustang back to life with some new window molding trim. Make sure you have the correct number of molding clips and screws to mount them correctly. These screws are only necessary with the screw type window molding clips.

These screws for the screw type molding clip will fit the following various applications with the correct number of clips and screws needed for installation, including:

-1965 Coupe front window(22)/rear window(19)
-1965 Fastback front window(22)/rear window(24)

This set contains 12 total screws. You will need multiple sets depending on your correct application.

Similar Mustang Parts

similar Mustang parts More Rear Window Moldings  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 77.18ms
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 78.84ms
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

Window Molding Clip Screw Set 1965 Video Transcript
By Bill Tumas: We're here with window molding clips for your 1964 through 1973 Mustang. There are two main styles of clips: '64 through '65 Mustangs will use the screw ones style shown here. There'll be holes in the metal and use the screw to screw the clip to the metal itself. Starting in late '65, they switched to a pin design. The pin is actually already attached to the metal and they use the slip on style clip shown here.

Here in our project 50/30, you can see the two different styles. Our cowl is a reproduction and has the studs already mounted on it. Since our car is an earlier '65, the original clips would have been a screw type like that. To install the screw type, you simply line it up and screw the clip into place. Clip on style ones, same basic idea. Just put it over the clip. Just slide it on.

You want to make sure you look at the panels on your car before you order the clips because different years could have the panels replaced and it could be different. In case of our '65, we know the panels are original and it has the screw one type located here. Our cowl was replaced. The manufacturer of the cowl uses the clip on style ones. Our roof skin's also been replaced. You see this case, there are actually no clips whatsoever. You have to drill the holes and use the screw one style shown here.

Both style of clips and the screws are also in package of 12. Our website as well as our catalog both have detailed descriptions on how many clips you'll need for your Mustang.