Windshield Molding Set for 1965-1968 Coupe and Fastback Mustangs.Is your Mustangs windshield in need of some fresh trim? This is the complete molding set for the windshield. These are beautiful reproduction pieces with a polished finish. Set includes five pieces.
Does not include mounting hardware.
Product ReviewsWrite a review
Windshield Molding Set Coupe/Fastback 1965-1968 is rated out of 5 by 5.
Rated 1 out of 5 by essex_biker from poor quality and fit bought this for my 65 fastback. where the sides and tops fit ok the lower molding wasnt curved enough on the corners and i had to refit the original. paid alot to get these shipped to the UK. DO NOT recommend.
Date published: 2016-01-23
Rated 5 out of 5 by ChuckL from Nice Fit and Looks Good The molding kit came with everything, clips included. One piece did come with a crease in it and I contacted CJ Pony and they replaced it. Worth my time to replace my scratched and dinged up molding
Date published: 2015-02-10
Rated 4 out of 5 by DaveB from Product is OK. Quite a bit of work to install these. Matter of fact, the side pieces did not fit well at all, so we had to polish the originals and fix and match with the new set.
Date published: 2015-06-12
Rated 4 out of 5 by Axl66 from Decent fitting Accurate product description and works well. Decent fitting after a little elbow grease but a quality product.
Date published: 2015-01-09
Rated 4 out of 5 by kat66 from Nice look! For an after market part this fit great and looks good.
Date published: 2015-06-05
Will this fit a convertible windshield?
Those will not fit a convertible, these are the only ones available http://www.cjponyparts.com/scott-drake-windshield-pillar-molding-pair-exterior-convertible-1965-1968/p/WM8/, and this http://www.cjponyparts.com/windshield-molding-lower-all-1964-1968/p/WM5/
Date published: 2016-08-11
Does this product not fit on a 67 convertible ? And do you have it also for a 67 convertible
That kit does not fit convertible, the only moldings available is the pillar moldings part #C5ZZ-7603136/7B.
Date published: 2015-10-21
will this fit a 1965 falcon 2 door hard top ?
Unlikely. It's designed for Mustangs, so you'd need to modify it to fit a Falcon.
Date published: 2015-04-01
Hi is it possible to get only wm5 bottom windscreen strip front and also passenger side strip without buying the full set if so what is the part number
Are the molding made of Stainless Steel?
I have just received my order no.19326551 A comprising windshield moulding set of 5 pieces.my old mouldings had a piece to join the 2 piece top section.should this piece have been included in my order or is it sold separately or is it now not necessary ?
By Bill Tumas: We're here with a windshield molding set for your '64 through '66 Mustang. The kit includes all five moldings along with hardware to mount them on your car. They're going to fit your coup or your fastback; they will not fit a convertible. If your original moldings are damaged or missing, our five piece kit is a great part for your restoration.