Windshield Weatherstrip 1965-1968

CJ's Part Number: WSWS
CJ's Low Price:
$20.99
In StockOrders placed today will ship tomorrow1411344000
Earn 20 RPM Points What's this?
WSWS
WSWS WSWS_1 Wsws_diagram Play Windshield Weatherstrip 1965-1968 Video 1 Play Windshield Weatherstrip 1965-1968 Video 3

Product Description

Windshield Weatherstrip for 1965-1968 Mustangs.

No restoration is complete without a full weatherstrip replacement. Don't let cracked and damaged seals ruin your new interior. This is a original style, one piece weatherstrip that completely forms to the windshield. A must when installing a new windshield.

Proper sealant is required for installation.

Two tubes of sealant is recommended by our service department.

Similar Mustang Parts

similar mustang parts More Mustang Fastback Weatherstrip  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Tight snug seal, but slightly fragile
I needed to replace the windshield in my 66 after painting the car, so I purchased this windshield gasket. I ended up buying two because the first one ripped near a corner when trying to pop it over the body... I was probably being too aggressive. It took some effort, but I have every reason to believe the window is in securely
Michael February 8, 2012
1 Results

Product Video

By Bill Tumas: We're here with a replacement windshield weather strip, fitting all 1964 through 1968 Mustangs. This heavy duty weather strip will fit Coupes, convertibles and Fastbacks. It's designed to be installed on the glass itself, before the glass is installed in the vehicle.

When ordering windshield weather stripping, you want to make sure you have at least 18 feet of a nice nylon string, the window wield caulk (two tubes are recommended), as well as a strip caulk for proper installation. Start by installing the weather stripping on the glass, which will go in this channel right here. This is a pressure fit channel, so there is no sealant necessary. Just put the glass right in. Once you have the glass installed in there, you want to open up this rear channel back here. In this channel, you want to put the strip caulk in and then the string and that's how you're going to install it on your vehicle.

Once it's installed in the car, you use the window wield tube to go around the whole outside to seal it properly. Our windshield weather stripping is sold separately. It's also available in our complete Mustang weather strip kits.