AMK Products Wiring Clip Kit for all 1969 Mustangs.
This Wiring Clip Kit from AMK Products includes 54 total pieces of factory correct, OE style clips and retainers that will secure the most common wiring on your 1969 Mustang. With this kit, you will have a specific amount of clips and retainers for the wiring at the doors, engine feed, firewall, horns and much more!
AMK Products' Wiring Clip Kit (69Z-WC) includes individually packaged sets of wiring clips and retainers for the most common wiring on your 1969 Mustang. Each package is thoroughly labeled so you know exactly where it goes on your Mustang. The individual packages also include the total number of pieces that are required for the specific application.
Wiring Clip Kit Includes:
- Door Courtesy and Speaker: Nylon O-Clips (2)
- Driver Side Aprons: 4" Nylon Straps (6)
- Engine Feed: Rubber Coated J-Clips (3)
- Firewall: 4" Nylon Straps (1 for Washer Hose) (3)
- Front Crossmember: Double Loop Nylon Retainers (4)
- Gas Tank Sender: Nylon O-Clips (3)
- Horn Feed: Nylon O-Clips (4)
- Passenger Side Apron Below Relay: D-Shaped Nylon Retainers (2)
- Radio Cable to Dash: Nylon S-Clips (2)
- Side Marker and Headlights: Nylon O-Clips (4)
- Turn Signal Lights on Hood Scoop: Nylon O-Clips (2)
- Under Dash: Nylon O-Clips (7)
- Various Locations: Zip Ties (12)
Buying individual sets of wiring clips and retainers for your 1969 Mustang can be expensive and time consuming if you're not sure which types you need. This Wiring Clip Kit makes it easy by including the correct clips and retainers that specifically fit your 1969 Mustang. With a Wiring Clip Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1969 Mustang is going to be restored with the most complete and correct wiring clip kit available!
Please Note: Not all wiring clips and retainers that can be found on the 1969 Mustang are included in this kit.
You can buy dozens of new parts for your Mustang. However, many of these new parts won't come with the appropriate hardware, or will expect you to reuse your old, rusted out hardware pieces. Well, if you're in either situation, the wide selection of AMK Products offered by CJ Pony Parts can fill the void and easily allow you to install your new Mustang parts with fresh, shiny, new hardware.
Order this premium AMK Products 69Z-WC Wiring Clip Kit for your classic 1969 Mustang today from CJ Pony Parts!
Product ReviewsWrite a review
You Might Also Like
Regular Price: $42.99
Special Price: $38.69