ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018

ACCELATEC: DPST3
MSRP: $308.57
CJ's Low Price:
$299.99
1560729600 65042
Be sure to get a new rear motor mount to go with your new downpipe!
CJ's Low Price:
$246.04
Qty
Earn 149 RPM Points What's this?
ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018
ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018 ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018 ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018 ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018 ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018 Play ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018 Video 1
ACCELATEC

Product Description

ACCELATEC Stainless Steel 3" Off Road Downpipe without a Catalytic Converter for all 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs.

Made out of sturdy stainless steel, this ACCELATEC (DPST3) 3" downpipe is just what you need if you're looking for measureable horsepower and torque gains while off-roading in your 2013-2018 Focus ST! You'll get all of the hardware you need to install it, and you can even reuse your existing O2 sensors.

Features and Benefits:
- Full 3" 304-Stainless Steel Construction
- Measurable HP/TQ Gains
- Durable 4" Flex Section
- V-Band Flange
- 2-Bolt Flange
- Includes 3" Gaskets to Match Stock or Aftermarket Cat-Back Systems
- Includes 3" Extension Pipe to Fit with MBRP Cat Backs That Have a 2.5" Reducer
- Comes With All Necessary Hardware
- Uses the Original Mounting Points
- Reuses Both O2 Sensors
- Made in the USA

This 3" Stainless Steel Off Road Downpipe without a Catalytic Converter has a durable 4" flex section and a V-band, 2-bolt flange. You'll install this downpipe using the original mounting points and the hardware that's included when you place your order. You'll also get 3" gaskets to match your stock or aftermarket cat-back systems. Even better? You also get a 3" extension pipe that'll fit with MBRP cat backs that have a 2.5" reducer. This downpipe is proudly made in the USA.

Please Note: Off-road downpipes are designed without a catalytic converter and are intended for off-road, race use only. We recommend that you get a tune with installation.

Tech Tip: The flange on this 3" downpipe will work with smaller diameter cat-back exhaust systems, such as 2-1/4" and 2-1/2". CJ Pony Parts has installed a variety of 3" downpipes onto smaller diameter cat-back systems without any issues.

At CJ Pony Parts, we carry some of the best exhaust systems and parts from well-known brand names so you can be sure you’re getting a product you can trust. When you want efficient, long-lasting and precision-engineered Ford Focus ST exhaust parts, our wide selection will help you take your favorite ride to the next level of performance.

Order a ACCELATEC (DPST3) 3" Stainless Steel Off Road Downpipe without a Catalytic Converter for your 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Similar Focus Parts

similar Focus parts More Focus ST Parts  

Installation Instructions

Mustang Installation

Focus Applications

This product will fit the following Focus years:

Product Reviews

Write a review
ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018 is rated 4.7 out of 5 by 13.
Rated 5 out of 5 by from Just perfect The quality of this down pipe is just as good (if not better) than brands with twice the cost. Fitment was dead on, and the hangers were one of the first I have installed that did not need cutting down (so it did not rub on the sub frame). Only thing I wish it did come with were the bolts for the upper downpipe bracket (connected to RMM mount). Some of the stock down pipes have the original bolts tack welded on. Also, wish it came with a new gasket for the turbo side at the V band connection. Some of the old gaskets for this are busted upon removal. But, for the price, quality, you can not go wrong with this. This is the one to get!
Date published: 2017-03-21
Rated 4 out of 5 by from Very nice workmanship Extension pipe flange should angle to the passenger side like the one that comes with MBRP exhaust. Fitment is off slightly because of this.
Date published: 2017-11-04
Rated 5 out of 5 by from High quality, great sound! Install was surprisingly simple. In and out in about two hours (with a lunch break). Not to mention the fast shipping. I was worried when I ordered it because the site said it was out of stock. But low and behold the next day I got an email saying my order had been shipped. CJ Pony Part's is the go to for Focus ST parts!
Date published: 2017-05-01
Rated 5 out of 5 by from Good downpipe! No issues with the downpipe, and it sounds amazing. Why spend extra hundreds on name brands when they're all 3" and do the same thing. The downpipe was on top and out of the bubble wrap so packaging was whatever but it's a solid piece so I doubt anything would have gotten bent or cracked lol.
Date published: 2017-01-17
Rated 4 out of 5 by from Cheap and Great Quality The downpipe I received was in very good shape and had all the hardware needed to mount and 3 inch gasket. the arms that come off of it were about an inch or two too far to the right and made it a real pain to get it on the hanger but other than that is was good
Date published: 2018-03-14
Rated 5 out of 5 by from OMG!!!!!!! Wow, when I installed it I was blown away with the sound, really brought out the turbo, only bad thing I can say is the rubber mount that goes to the frame isn’t big enough but other than that wow blown away CJ YOU GUYS RULE AND WILL ALWAYS BE GUCCI
Date published: 2019-03-21
Rated 4 out of 5 by from Love the sound Installed this weekend. Instantly fell in love. Coupled beautifully with my MBRP. Just like everyone else have an issue with it rubbing my subframe. But I can deal with a little grinding.
Date published: 2019-02-04
Rated 4 out of 5 by from Great for the price, some fitment issues. Basically, only issue was the fitment of the lower mount pegs. They were too close together, and one was alot longer than the other and rubbed the subframe. Other than that no issues.
Date published: 2018-09-28
  • y_2019, m_6, d_16, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_DPST3, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 9.2ms
  • REVIEWS, PRODUCT

Product Questions

would this fit with the AWE track exhaust

Asked by: chuck
Yes.
Answered by: rk cjpp
Date published: 2018-11-09

Do you need the support bracket that is attached to the rmm?

Asked by: Jake
Yes.
Answered by: rk cjpp
Date published: 2018-10-01

Can I use a cobb Stock map like a stage 2 or do i need a custom tune to run it

Asked by: Palma437
You would need a custom tune.
Answered by: CJPP Dave
Date published: 2019-02-07

Will you ship to California

Asked by: Edtorres
We cannot.
Answered by: rk cjpp
Date published: 2018-09-11

Will this work with the Ford Performance Exhaust for the ST?

Asked by: Jesse1980
Yes.
Answered by: CJPP Dave
Date published: 2018-08-06

can i install this downpipe on a focus st-line from 2017??

Asked by: SeudolokianST_Line
This will fit 2013-2018 focus ST's.
Answered by: rk cjpp
Date published: 2018-07-20

Will it fit with the stock Exhaust?

Asked by: Rwaha
The flange on this 3" downpipe will work with smaller diameter cat-back exhaust systems, such as 2-1/4" and 2-1/2". CJ Pony Parts has installed a variety of 3" downpipes onto smaller diameter cat-back systems without any issues.
Answered by: rk cjpp
Date published: 2018-07-09

Will you guy release a house brand off road down pipe for the focus RS

Asked by: 2017fors
Not at this time.
Answered by: rk cjpp
Date published: 2018-06-22
  • y_2019, m_6, d_16, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_DPST3, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 35.62ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

ACCELATEC Downpipe Off Road Stainless Steel 3" Focus ST 2013-2018 Video Transcript
By Bill Tumas: We’re here with a 3-inch stainless steel off-road downpipe fitting your 2013 through 2016 Focus ST. A high-flow downpipe has always been one of the easiest ways to get horsepower out of your 2013 through 2016 Focus ST. This 304 stainless steel downpipe is going to be a direct replacement for your factory downpipe, but does not have a catalytic converter, making it for offroad use only, but also going to be much higher flowing than a standard style setup. This high-quality 304 stainless steel downpipe uses the original V band style clamp with the factory hardware, includes an original style mounting bracket, works with both your original O2 sensors, and has a high-quality 4-inch flex pipe. The kit includes this 3-inch extension for use with some aftermarket catback systems, and also includes the necessary gaskets and hardware for installation. This 3-inch stainless steel offroad downpipe will require a tune but it's a great way to add horsepower and torque to your Focus ST. A high-flow catted version is also available.