ACCELATEC Jacking Rail Low-Profile Pair Mustang Fastback 2015-2022

94% of 100


MSRP $149.99
You save $5.00

Pair of ACCELATEC Low-Profile Chassis Jacking Rails for 2015, 2016, 2017, 2018, 2019, 2020, 2021 and 2022 Fastback Mustangs.

If you're looking to ensure that your 2015-2022 Fastback Mustang is safe when you work on it, then you'll definitely want to invest in this Pair of ACCELATEC Low-Profile Chassis Jacking Rails! Pick up your new rails from CJ Pony Parts today!

Features and Benefits:
- Allows you to easily lift your Mustang anywhere along the rail
- Pair of two (2) rails help prevent unwanted damage to factory pinch welds
- Ideal when using jack stands, floor jacks, and vehicle lifts
- Constructed using high-quality materials with a satin black powder-coated finish
- Light-wight, low-profile rails weigh 13.1 lbs and include all needed mounting hardware
- Proudly made here in the U.S.A.

CJ's knows that you want to keep your brand-new pony safe as you begin to modify it, so being able to safely jack it up or lift it is a must. These high-quality jacking rails from ACCELATEC will provide your Mustang's driver and passenger sides with a safe place to use a jack stand or floor jack, ensuring that the vehicle stays aligned and the frame's welds are maintained. Each of the two rails is constructed from high-quality materials with a durable black satin powder-coat finish. All necessary mounting hardware is included with these lightweight rails, so you can get the project done and get back to work right away.

Please Note: These WILL work with upgraded IRS Subframe Support Braces (SFC44) without any interference.

Vehicle Fitment:
- 2015-2022 Fastback Mustang

*Will not fit 2015-2021 Convertible Mustangs.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

Today we're gonna install a very simple part that'll make jacking up your 2015 through 2018 Mustang Fastback a lot easier.

Your S550 Mustang has two small factory jacking points on each rail. And if you jack up your car regularly it is easy to get to these and damage them sometimes or even harder to find them. These jacking rails will fit your 2015 through 2018 Fastback. And these are gonna go on the entire pinch weld making it allowed to jack the car up any way you'd like to. These are very easy simple installation. Again, they fit Fastback only and today we're gonna install them in my 2018.

Beginning installation get your car off the ground and we're gonna remove three factory bolts. Two here in the front and then one in the back. What we're gonna do now is clean off a little bit of this sealer here. I've seen it in various heights on different cars. Mine's actually not that bad, but I've seen it kind of clumped on before. You want to get it smoother so that our jacking rail fits flush. Razor blade will work fine for this.

Now at this point if you want to install a little bit of brushable seams there you absolutely could, but if you look the factory sealer, it's still in the channel between the two pieces of metal work, should be. So, it is still sealing it up.

The jacking rails are side specific. You want to grab the one ... the two holes are gonna go forward with the shorter section and then this edge here goes up against the pinch weld. You want to get all the bolts started before you tighten anything down.

In the rear location here, the rear bolt goes in the one we removed and there's a factory spot right up here. Once all the bolts are started we can tighten them down. And you want to repeat the process on the other side, and your installation's finished.

Well the jacking rails installed. Now we can jack up the car pretty much anywhere along the pinch weld, it makes it a lot easier to do. Especially if you're changing wheels and tires, you put the jack in the middle and lift up one side of the car, which is gonna save you a lot of time and trouble.

As far as the installation goes, the only tools you're gonna need are a 15 millimeter socket and a razor blade. Figure about half an hour. Be back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart