ACCELATEC Paddle Shifter Extension Pair 2015-2020

ACCELATEC:
PSHIFT1-V
Rating:
98% of 100
From
$64.99
From $79.99

ACCELATEC Pair of Paddle Shifter Extensions for 2015, 2016, 2017, 2018, 2019 and 2020 Mustangs with an Automatic Transmission.

Like most 2015-2020 Mustang owners that opted for an Automatic Transmission, you were probably excited when you found out that Ford had decided to incorporate paddle shifters into the steering wheel. But chances are that excitement turned into disappointment the moment that you tried the OE paddles – it’s time for a change!

These ACCELATEC Paddle Shifter Extensions are perfect for any 2015-2020 Mustang that is equipped with an Automatic Transmission. From the factory, the paddle shifters that are found on the back of the steering wheel are very small and can be difficult to locate during spirited driving. The solution is these extensions that will easily solve that issue and look great at the same time. Available in your choice of different durable painted finishes to offer a unique appearance, all the available options are made from high-quality aluminum billet aluminum.

Paddle Shifter Extensions Feature:
- High-Quality Billet Aluminum Construction
- Typically Only Found on High-End Exotics
- Drastic Improvement in Shifting Accuracy
- Engraved “+” and “-“ for Upshifts and Downshifts
- Unique Painted Options Provide an OE Look
- Requires NO Permanent Modifications
- Pre-Applied Double Stick Tape for Easy Installation

*Fits ALL 2015-2020 Mustangs equipped with an Automatic Transmission ONLY.

With their Billet Aluminum construction, these Paddle Shifter Extensions will hold up to just about any abuse that you plan on throwing their way. You will be thoroughly impressed with the weight the billet aluminum provides as it helps promote positive engagement with every upshift and downshift. Treat yourself and your Automatic Transmission equipped S550 with something typically only found in high-end exotic cars. Don't wait and grab your new pair of paddle shifter extensions now from CJ's!

Installation Videos

Video Transcript

Today we're going to make manually shifting our 2018 Mustang automatic a lot more fun with a custom set of Billet paddle shifter extension.

These custom paddle shifter extensions will fit all 2015-2018 Mustangs with the automatic transmission. They're much larger than the factory ones, but install easily with double-stick tape, giving a much more performance feel and a much better look overall. They're built with aluminum and available in black, silver or red. They're also available in carbon fiber. As we're going to show you, they're very easy to install.

The paddle shifter extensions include a downshift and upshift paddle. They're very easy to install. They're going to fit, basically over the factory paddles. They look a lot better, plus it's a much larger surface to actually shift with. As far as the installation goes, there's no tools required. All you need is some double-stick tape.

What I'm going to do is grab some good quality double-stick tape, like Scotch, 3M, something decent, and basically where you see these lines, this is the section here that's most important. You can put a little piece over here if you want, as well. Don't get it into the curve, though. Make sure it's only on the flat section.

To prep the factory paddle for installation, we're going to basically put some alcohol on here to make it stick better. But if you're doing this installation in the winter time, like we are, right now it's about 12 degrees outside, and the car just came in, and this is ice cold. If this is cold, it's not going to stick. We either want to let it warm up to warm temperature, or grab a heat gun, hair dryer, even use your hand and just warm it up before you try to stick it on.

Rubbing a little bit of alcohol, just rub it on the back. Carefully peel the backing away, then we'll line it up. Just press and hold it for about 30 seconds or so. Make sure it's seated properly. The nice thing with this, too, is when you're driving, you're pushing towards the tape, so it's not like it's going to push it off at all. As long as you get a good adhesion the first time, you won't have any issues. And I'll repeat the process with the other paddle. Once you have good adhesion, then your installation's finished.

The paddle shifter extensions are obviously very, very easy to install, and add an almost exotic super car look to our Mustang's interior, plus they're a lot more functional than the factory ones. All you're going to need for installation is a little bit of rubbing alcohol and some tape, take you no more than about five minutes and you're back on the road in no time.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart