Accelerator Cable V8 1969

CJ's Part Number: ACC1
CJ's Low Price:
1508630400 1481
Earn 39 RPM Points What's this?
Accelerator Cable V8 1969
Accelerator Cable V8 1969 Accelerator Cable V8 1969 Accelerator Cable V8 1969 Accelerator Cable V8 1969 Accelerator Cable V8 1969

Product Description

Accelerator Cable for 1969 Mustangs with a V8 Engine.

One of the most important parts of a properly working 1969 V8 Mustang is a high-quality accelerator cable. You're not going anywhere without one! So make sure the one that's in your 'Stang is in good shape and will do what it's supposed to. Pick up this Accelerator Cable from CJ Pony Parts today!

This Accelerator Cable connects your Mustang's accelerator pedal to the carburetor, and it measures 22.71" in length. If your throttle is feeling "sticky" or if the accelerator pedal goes all the way to the floor without your Mustang picking up speed, then chances are this Accelerator Cable will fix the problem! This is a sturdy direct fit replacement cable that you'll install right in the factory location.

Please Note: This Accelerator Cable does not fit Boss 429 engines.

Getting your Mustang to move all starts with the throttle and accelerator pedal. However, what happens if any of those parts break? Well, you can replace them with Mustang throttle parts and accelerator pedals from CJ Pony Parts. With plenty of different parts available, you can find whatever you need and get your Mustang moving again!

Order an Accelerator Cable for your 1969 Mustang with a V8 Engine from CJ Pony Parts today!

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Accelerator Cable V8 1969 is rated 4.3 out of 5 by 4.
Rated 5 out of 5 by from Looks just like the original one. Don't need it at the moment but I have a spare now.
Date published: 2016-01-14
Rated 2 out of 5 by from Crimping Issues The two ends were not crimped in an orientation where the anchor slug did not want to jump out of the foot accelerator bracket. Way it hooked to the carb the anchor slug wanted to have the side portion going vertical vs. horizontal. If you are installing one, sure you will know what I mean there. I ended up running a small bolt and nut through the foot accelerator after the slug was installed to keep it from jumping out when I let go of the accelerator.
Date published: 2016-11-23
Rated 5 out of 5 by from Just like original Bought this a few weeks ago. Fits like the original or maybe better
Date published: 2015-08-29
Rated 5 out of 5 by from it works Easy to install and fit like factory new. 69 with a 302.
Date published: 2015-06-18
  • y_2017, m_10, d_21, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_ACC1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 136.4ms

Product Questions

This cable seems to be an inch or more too long. When I set the carb to be open 100% the gas pedal is still at least one inch off the floor when depressed all the way. Push any harder and the cable may What am I doing wrong or is there a shorter cable?

Asked by: tommyt
I am having this same issue and cannot achieve WOT.  Anyone know of a fix for this?
Answered by: GMONEYCA
Date published: 2016-08-05
  • y_2017, m_10, d_21, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_ACC1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 207.98ms

You Might Also Like