ACP Headlight Switch Pre 8/17/64 1965
Headlight Switch Pre 8/17/64 1965 is rated out of 5 by 4.
- Direct-Fit Replacement
- High-Quality Reproduction
- Restores Function
- Includes Adapter For Dash
You save 7%
ACP Headlight Switch for 1965 Mustangs Built Before 8/17/1964.
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
Rated 4 out of 5 by NMad from Works well, a bit of a pain to install. Part works just fine - fixed my headlight flashing on/off problem. The fit was a little tight (leads on this switch seemed to be thicker than stock). Was a pain to press together onto the harness because its cramped under the dash. It's difficult to align the "stand off" piece correctly so I used a bit of CA glue to hold it in place onto the switch itself to make instillation much easier. Everything works it just took a bit of patience at an uncomfortable angle. No need to take off the full dash, was able to install by just swapping this out with the old one under the dash. Installed on a 64.5' 260 V8 coupe
Date published: 2016-01-25
Rated 5 out of 5 by Stang_McRusty from Fixed my issues I was having issue with the dash lights not coming on. This switch fit in and functioned perfectly. It does require the correct year/length knob to look and work properly.
Date published: 2019-06-17
Rated 5 out of 5 by centurion from perfect fit solved my dash light problems in my 64.5 now I can cruise at nite
Date published: 2019-07-25
Rated 5 out of 5 by Flopsy from Switch Right part for classic car and service was good thankyou
Date published: 2017-06-10
I have a 1965 mustang built March 24 1965. I need to buy a headlight switch. Can you please tell me what headlight switch I need and the part number. Thanks for your time.
This should be the one, http://www.cjponyparts.com/headlight-switch-1965-1968/p/SW441/
Date published: 2017-09-19
Need to replace Head light Switch (1965 Mustang GT ). I can't reach under dash. I have to take dash cluster off . What headlight switch is the correct one for this job . Also do you sell extra screws to secure the dash cluster when it is replaced.
You'll likely need CJ part # SW441. You'll just reuse the existing screws to secure the dash cluster.
Date published: 2015-09-09
Complete Your Package