ACP Strut Rod Bushing Kit 1967-1973
Strut Rod Bushing Kit 1967-1973 is rated out of 5 by 3.
- Direct-Fit Replacement
- High-Quality Rubber
- One Kit Will Do One Car
- Keep Your Strut Rod Stable
ACP Strut Rod Bushing Kit for all 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.
California Residents: Proposition 65 Warning
Rated 4 out of 5 by Mike B4 from You may need some leverage I recently replaced the strut bushings on 67 Mustang. The bolts that hold the bushings on the strut rod were really corroded on and where a real grunt-fest to get off. I recommend a thorough dosing in oil and a wire brush thread clean up first. I did this clean up step and still need to use my floor jack handle on the breaker bar to break the nuts loose. I also reinstalled the old strut rods, but think that may have been a lazy move. I will likely get new strut rods because the threads are just messy - the threads on the underside of the car just gets gunk rammed in and they fought every turn off and then back on. An alignment is a must after this repair because it likely changes the geometry a bit. One other thing, look at the inside bushing washer orientation in the instructions, it is a bit counter-intuitive.
Date published: 2019-02-23
Rated 5 out of 5 by Fritz2013 from Strut Rod bushing Item didn't come with my complete order so I purchased elsewhere rather the hold up my installer.
Date published: 2016-02-18
Rated 5 out of 5 by Rosaw56 from perfect fit replaced both left and right sides stopped the clunking noise my old bushings were making
Date published: 2016-10-18
Complete Your Package