aFe Axle-Back Exhaust System 2-1/2" Scorpion Aluminized Steel Jeep Wrangler JK 2007-2018

100% of 100


  • Aluminized Steel Construction
  • 2-1/2" Mandrel Bent Piping
  • Bolt-On Installation
  • Made In The USA!
MSRP $411.25
You save 20%

aFe 2-1/2" Aluminized Steel Scorpion Axle-Back Exhaust System for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.

Increase your 2007-2018 Jeep JK Wrangler's horsepower and torque by improving airflow with this 2-1/2" Aluminized Steel Scorpion Axle-Back Exhaust System from aFe. This exhaust system is finished off with a hi-tuck tip designed to give your JK extra clearance during extreme angle climbs or descents. Plus, it will add an aggressive exhaust tone to your JK!

Features and Benefits of the aFe 2-1/2" Aluminized Steel Scorpion Axle-Back Exhaust System (49-08046):
- Crafted from premium aluminized steel
- Mandrel-bent tubing
- 13" baffled muffler
- Hi-tuck tip for extra clearance
- Enhances airflow
- Increases horsepower and torque
- Improves throttle response
- Adds aggressive sound to your Jeep
- Corrosion resistant
- Comes with OE style bayonet hangers
- Includes band clamps
- Required hardware is supplied
- Simple, straightforward installation
- Made in the USA
- Fits ALL 2007-2018 2-door and 4-door Wrangler JKs

aFe constructs this Scorpion Aluminized Hi-Tuck Axle-Back Exhaust System in the USA out of 2-1/2" mandrel-bent aluminized steel tubing. This exhaust system comes complete with a 13" long baffled muffler which produces an aggressive sound and features a corrosion resistant protective coating. This axle-back exhaust kit includes OE style bayonet hangers, band clamps and all the hardware necessary for a hassle-free installation.

The smooth curves and increased diameter of this exhaust system help remove restriction and keep exhaust gas flowing smoothly for increased horsepower, torque and throttle response!

aFe, formally known as Advanced Flow Engineering, is a world renowned manufacturer of top quality aftermarket parts and equipment. Creating premium grade equipment for more than a decade, aFe has quickly become a brand that many Jeep enthusiasts flock to.

Order aFe's 49-08046 2-1/2" Aluminized Steel Scorpion Axle-Back Exhaust System for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty


Novice skill is required for this installation.

Installation Videos

Video Transcript

If you're looking for a quick and easy way to improve the sound and performance of your JK Wrangler, axle-back exhausts are a very popular upgrade. Here at CJ's we offer a ton of different options, and we want to show you as many as we can, so today we're going to be installing this aFe Scorpion axle-back exhaust. This aFe Scorpion axle-back exhaust is made of mandrel-bent aluminized tubing with a baffled muffler and a high tuck tip for off-road use. This axle-back exhaust is going to be super easy to install and will improve performance and sound and give you a little bit more ground clearance. Today we're going to install it using our 2016 Jeep Wrangler.

This axle-back exhaust is going to be super easy to install. There's only one 15 millimeter nut holding it on. Then you just have to remove the muffler from the two rubber hangers. Remove the 15 millimeter nut on the exhaust clamp ... Now we're going to remove this bracket from the rubber hanger on the Jeep ... All right, now we can move to the other hanger. Once both hangers are disconnected, grab onto the muffler and twist it to break it lose from the pipe, then you can pull it off.

With the factory exhaust out of the way, the first thing we're going to do is put the provided clamp on the over axle pipe. Then install the inlet pipe into the hanger, then the over axle pipe ... Slide the other clamp on this side of the inlet pipe. Slide the muffler onto the inlet pipe. Then insert it into the hanger on the passenger side ... Get it to where you like it, and then tighten all the clamps. Tighten both clamps using a 15 millimeter socket ... Your installations finished.

All right, let's hear it ... Our aFe Scorpion axle-back exhaust is installed. It's tucked up nicely for more ground clearance. Gives our Jeep a nice tone, but it's not too loud. Installation will take you about 45 minutes, and before you know it you'll be heading off-road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.