aFe Axle-Back Exhaust System Rebel Series 2-1/2" Stainless Steel With Dual Black Tips 3.6L/2.0 Turbo Jeep Wrangler JL 2018-2021

aFe:
49-48067-B

Highlights

  • Direct-Fit Upgrade
  • Fits 3.6L & 2.0L Turbo Engines
  • 4.5" Black Angle-Cut Tips
  • Made In The USA
MSRP $753.75
$603.00
You save 20%

aFe Stainless Steel 2-1/2" Rebel Series Axle-Back Exhaust System with Dual Black Tips for 2018, 2019, 2020 and 2021 Jeep JL Wranglers with 3.6L and 2.0 Turbo Engines.

Are you in the market for an upgraded exhaust kit for your 2018-2021 JL Wrangler? Than this high-quality aFe Stainless Steel 2-1/2" Rebel Series Axle-Back Exhaust System with Dual Black Tips (49-48067-B) may be right up your alley! Pick up yours today from CJ Pony Parts!

Features and Benefits:
- Designed to work with both 3.6L V6 and 2.0 Turbo engines
- Constructed using high-quality 406 stainless steel mandrel-bent 2.5" tubing
- Features durable MIG-welded seams for increased durability and longevity
- Offers a louder, more tuned exhaust sound over stock system
- Complete kit will re-use original factory mounting locations for faster install
- Includes two (2) 4.5" black angle-cut exhaust tips
- Made here in the USA

aFe designed this complete axle-back exhaust system to be a bolt-on, direct-fit upgrade to your Jeep's lame stock exhaust! It features premium mandrel-bent stainless steel tubing and a free-flowing muffler and includes a set of two (2) sporty black exhaust tips. You'll love the deeper, more pronounced sound the kit provides your JL, and since install is quick and easy, your Wrangler will be back to making noise on the trail in no time flat. Go ahead and grab your new axle-back kit from CJ's now!

*This axle-back exhaust system is also available with Polished Tips (4948067P) instead of the Black.
*Will fit both 2-door and 4-door models.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We're gonna change the exhaust out of our JL Wrangler on CJ Off-Road. If you're looking to get rid of the factory exhaust tone on your JL Wrangler, today we're gonna be installing this aFe Rebel Series 2 1/2" stainless steel exhaust, fitting your 2018 JL four-door Wrangler. This aFe exhaust is constructed using high-quality 409 stainless steel and then it's mandrel bent with 2 1/2" tubing. It features a 3" tip, and it's all powder-coated in a durable satin gray finish, and includes all the necessary hardware to get bolted on. This exhaust features durable make welded seems for increased durability and longevity. The complete kit will reuse the original factory mounting location for a super simple installation. It includes two 4 1/2" black angle cut exhaust tips that are powder coated and feature the aFe POWER logo. With that being said, let's see what it sounds like on our 2018 JL Wrangler.

We've got our Jeep up in the air on a lift. Now, this isn't necessary to do, you could use a jack and jack stand. We're gonna use a 15mm socket to get this last bolt holding on this axle back exhaust, get that pulled off. Loosen this clamp here with a 15mm deep socket. Once that's loosened up we can work on the hangers towards the front. There's gonna be two exhaust hangers, one in the passenger side right up here, then one on the driver's side. We're gonna get those pulled off. Now, you can use a pry bar, however, we do have an exhaust hanger remover tool here. It's pretty simple, so let's get those pulled off.

Now you're ready to install the aFe Rebel exhaust. I'm gonna put this over the clamp, kinda work it on up there. Install the other side. Now we can work on that front section with a clamp. Now, this clamp that you slid on before you installed it, we're gonna slide this over and get it tightened down. Go ahead and place the tip on the outside of the pipe. I like to slide mine back all the way, that way it kinda lines up with the bumper here. Make sure the clamp is on first, then get that tightened up with a 15mm long socket.

Then place the other tip on. Same thing here, I like to line it up all the way up towards the back. Then get the band clamp tightened up, just like we did on the other side. And that's it, your installation's complete. That wraps up the installation of the aFe Rebel exhaust on our 2018 JL four-door Wrangler. Now, this exhaust was really simple to install, being that it isn't axle-back exhaust. You only need to use a 15mm socket, and a little bit of help pulling those hangers off. It looks really awesome. It's got a black finish and it's stainless steel. Plus, these tips make it look really aggressive in the rear. But, you can find this exhaust, as well as many other great parts for your JL right here at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.