aFe Cat-Back Exhaust System 2-1/2" Scorpion Aluminized Steel With 3" Polished Tip 4-Door Jeep Wrangler JK 2007-2018

aFe:
49-08044-1P
MSRP $588.75
$471.00
You save 20%

aFe 2-1/2" Aluminized Steel Scorpion Cat-Back Exhaust System with a 3" Polished Tip for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4-Door Jeep JK Wranglers.

Upgrade your 2007-2018 Jeep Wrangler JK with this 2-1/2" Aluminized Steel Scorpion Cat-Back Exhaust System with a 3" Polished Tip from aFe. It will give your JK more power, improve its throttle response and add a deep and aggressive sound!

Features and Benefits of the 2-1/2" Aluminized Steel Scorpion Cat-Back Exhaust System with a 3" Polished Tip (49-08044-1P):
- Made out of premium mandrel-bent aluminized steel tubing
- Highly polished 304 stainless steel tip
- 13" long baffled muffler
- Increases horsepower and torque
- Enhances throttle response
- Provides aggressive sound
- Anti-corrosion protective coating
- Comes with OE style bayonet hangers
- Includes band clamps
- Hardware is supplied
- Proudly manufactured in the USA

This Scorpion aluminized cat-back exhaust system is constructed of 2-1/2" mandrel-bent aluminized steel tubing. It comes with a highly polished 304 stainless steel 3" oval rolled edge laser-etched tip. The clamp on tip can be removed during off-road adventures in order to keep it free from damage.

This exhaust system comes complete with a 13" length baffled muffler which provides an aggressive sound and features an anti-corrosion protective coating. OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation are also supplied. The smooth curves and increased diameter of this exhaust system help remove restriction and keep exhaust gas flowing smoothly for increased horsepower, torque and throttle response!

*This exhaust system does NOT fit 2-door models.

aFe, formally known as Advanced Flow Engineering, is a world renowned manufacturer of top quality aftermarket parts and equipment. Creating premium grade equipment for more than a decade, aFe has quickly become a brand that many Jeep enthusiasts flock to.

Order aFe's 49-08044-1P 2-1/2" Aluminized Steel Scorpion Cat-Back Exhaust System with a 3" Polished Tip for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4-Door Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

The factory exhaust on the JK Wrangler is big, ugly and restrictive, and that is just not okay and it's time for it to go. Today we're gonna help our Jeep breathe better and give it some better offer of clearance by installing this aFe Cat-Back Exhaust.

This aFe Cat-Back Exhaust is made of two and a half inch mandrel-bent aluminized tubing with a high flow muffler and a polished tip to give your Jeep a nice look and better sound. It comes with everything you need for an easy installation. So today we're gonna install it on our 2016 Jeep Wrangler.

Tools you will need for this installation: a lift or a jack and jack stands, 1/2" ratchet, 15mm socket, 18mm socket, 15mm wrench and you might need an exhaust hanger removal tool.

This cat-back exhaust is pretty simple to install, we have to start off by removing the factory system which is pretty easy. Just remove this clamp right here on the muffler, then remove the muffler from the two hangers.

Loosen the clamp with a 15mm socket.

Remove the driver's side hanger from the muffler.

Then remove the rubber hanger from the frame mount.

With both hangers removed, just twist the muffler, and pull it off.

Come up to the front of the exhaust now where the front pipe meets the y-pipe, and remove the clamp. Now if you have some miles on your Jeep, this clamp might be pretty hard to remove, so you might want to use some penetrating lubricant.

Remove the rubber hanger from the front pipe. Then there's one more hanger to remove. Then remove this rubber hanger near the axle.

Lower the skid plate by removing the rear two bolts, and then loosening the front two.

Then come back to the back of the exhaust and twist it to pull it off the front pipe.

Bring the exhaust back. Bring it around the skid plate, and then bring it forward to remove it. With the factory system out of the way, install a clamp over the y-pipe, then install the front pipe. Grab this hanger clamp, install the rubber hanger onto it. Then with the hanger on the bottom, facing the driver's side, put it on the front pipe.

Slide it forward. And attach it to the frame mount. Place another clamp over the front pipe. Install the over axle pipe, slide it into the front pipe, then get it into the rubber hanger.

Place a clamp over the muffler in that pipe. Install it onto the over axle pipe. Then get it into the rubber hanger.

Place the last clamp on the muffler, put it on the inlet pipe.

Get it positioned to where you like it. Then you can go back and tighten all the clamps. You can now tighten all the clamps, start at the front then work your way back.

Use a wrench to tighten the clamp hanger. Finally put a clamp over the tip. Install it onto the tailpipe, position it where you want it. And tighten it down.

Finally reinstall the skid plate, and your installation's finished.

All right, let's hear it.

Our aFe Cat-Back Exhaust is installed, it looks great on this Jeep. It's not over the top, it gave it a nice sound too that's not too loud. Installation's pretty simple, it's only gonna take about an hour. And before you know it, you'll be heading off road.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.