aFe Cat-Back Exhaust System 2-1/2" Scorpion Aluminized Steel With Turndown Tip 4-Door Jeep Wrangler JK 2007-2018
aFe 2-1/2" Aluminized Steel Scorpion Cat-Back Exhaust System with a Turndown Tip for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4-Door Jeep Wranglers.
Get your 2007-2018 4-Door Jeep Wrangler JK ready for off-road adventures with this 2-1/2" Aluminized Steel Scorpion Cat-Back Exhaust System with a Turndown Tip from aFe. This exhaust kit will also give your JK a loud and aggressive sound!
Features and Benefits of the aFe 2-1/2" Aluminized Steel Scorpion Cat-Back Exhaust System with a Turndown Tip (49-08040):
- Constructed from mandrel bent aluminized steel tubing
- Increases horsepower and torque
- Enhances throttle response
- Adds aggressive exhaust sound
- Eliminates exhaust drone
- 18" long chambered muffler
- Hi-tuck tip for extra clearance
- Comes with OE style bayonet hangers
- Includes band clamps
- Necessary hardware is supplied
- Simple to install
- Proudly manufactured in the USA
The Scorpion aluminized hi-tuck "Rock Basher" (RB) cat-back exhaust system is constructed in the USA out of 2-1/2" mandrel-bent aluminized steel tubing. The smooth curves and increased diameter of this exhaust system help remove restriction and keep exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with an 18" length chambered muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.
This system incorporates a large 18" length 2-layer aluminized steel chambered muffler for an aggressive sound while eliminating exhaust drone. The muffler is located prior to the rear axle for increased climbing angles. This exhaust system is finished off with a hi-tuck tip which is developed to give your Jeep extra clearance during extreme angle climbs or descents. The driver-side exit location is perfect for adding onboard air compressor system to the underside of your JK.
*This exhaust system fits the 4-door Wrangler JK Unlimited ONLY.
aFe, formally known as Advanced Flow Engineering, is a world renowned manufacturer of top quality aftermarket parts and equipment. Creating premium grade equipment for more than a decade, aFe has quickly become a brand that many Jeep enthusiasts flock to.
Order aFe's 49-08040 2-1/2" Aluminized Steel Scorpion Cat-Back Exhaust System with a Turndown Tip for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4-Door Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
This cat-back exhaust is pretty simple to install. We have to start off by removing the factory system, which is pretty easy. Just remove this clamp right here on the muffler. Then remove the muffler from the two hangers. Loosen the clamp with a 15 millimeter socket. Remove the driver side hanger from the muffler. Then remove the rubber hanger from the rubber frame mount. With both hangers removed, just twist the muffler, and pull it off. Come up to the front of the exhaust now where the front pipe meets the white pipe and remove the clamp. Now if you have some miles on your jeep, this clamp might be pretty hard to remove. So you might want to use some penetrating lubricant.
Remove the rubber hanger from the front pipe. Then there's one more hanger to remove. Then remove this rubber hanger near the axle. Lower the skid plate by removing the rear two bolts and then loosening the front two. Then come back to the back of the exhaust and twist it to pull it off the front pipe. Bring the exhaust back. Bring it around the skid plate. Then, bring it forward to remove it.
With the factory system out of the way, the first thing you're gonna do, is remove these two bolts on the charcoal canister bracket. They're both 16 millimeter bolts. Then you're gonna install this exhaust hanger bracket that AFV supplies. Re- install the bolts that you just removed. Make sure this bracket is pointing towards the drive shaft. Install a clamp over the white plate. Install the rubber hanger onto the muffler pipe. Install the muffler onto the white plate. Install the rubber hanger onto the frame mount. Install the provided rubber hanger onto the bracket that you just installed. Then onto the muffler.
Install the last clamp over the muffler. Then install the tail pipe. Install another rubber hanger. Install the last hanger, then you can move on to tightening the clamps. Tighten the clamps with a 15 millimeter socket. Start at the front then work your way back. Re-install your skid plate, then your installation's finished. All right, let's hear it. Our AFV Cat-Back exhaust is installed. We got that big muffler out of the way. The tail pipe's tucked up nice and high for better clearance. It sounds pretty good to. Gave our Jeep a nice throaty sound. Installation should only take about an hour, and before you know it, you'll be heading off road.