American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017

American Car Craft: 271037-RD
MSRP: $237.70
CJ's Low Price:
$213.93
1508544000 67012
Earn 213 RPM Points What's this?
American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017
American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 Play American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 Video 1 Play American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 Video 2
American Car Craft

Product Description

Pair of American Car Craft Red LED Illuminated Brushed and Polished Stainless Steel Door Sill Plates for all 2015, 2016 and 2017 Mustangs.

Keep the door sills on your 2015-2017 properly protected while also improving their overall look by purchasing this Pair of American Car Craft LED Illuminated Brushed and Polished Stainless Steel Door Sill Plates.

Features & Benefits:
- Manufactured from 100% Stainless Steel
- LED Illumination
- Brushed & Polished Finish
- Available in Multiple Color Options
- Rust Resistant
- Sold as a Pair
- Made in the USA

These door sill plates have been handcrafted from 100% stainless steel to provide superior protection while also incorporating an LED illumination to make your door sills look as if they are a brand new custom creation. Sold as a pair so you have one for your drive and passenger side, you'll be able to choose which color illuminated from your door sill area. Completely made in the USA, each plate has a brushed and polished finished that is rust resistant and will last for many years to come.

Has the sill plate on your Mustang finally worn out? With the kind of abuse they can take on a daily basis, it could easily be time to replace the sill plates in your Mustang. CJ Pony Parts has plenty of Mustang Sill Plates options for you to choose from which will give you that new sill plate and could allow you to add some style to your Mustang as well.

Purchase this American Car Craft Pair of LED Illuminated Brushed and Polished Stainless STeel Door Sill Plates for your 2015, 2016 or 2017 Mustang from CJ Pony Parts today!

 

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 126.03ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 141.02ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like

Product Video

American Car Craft Door Sill Plate LED Illuminated Brushed And Polished Stainless Steel Red Pair 2015-2017 Video Transcript
By Bill Tumas: We know Mustang buyers pick up a base model for a lot of reasons. Sometimes it's a cost thing, sometimes they just don't want all the options that come on the premium Mustang. But, sometimes there might be some options you do like, and that would be the case with the light up door sill plates. Now, if you have a base model and love the look of light up door sill plates, today we're going to show you how to install them using these custom door sill plates from American Car Craft. These light up door sill plates from American Car Craft are available in your choice of a red, white, or blue LED lighting. They come with a brushed stainless steel finish, and you can install easily using double stick tape. For this installation, we need a 1/4 inch ratchet, 10 mm socket, and wire crimpers with some terminals.

Well, the first thing you'll want to do is disconnect your battery. Once you do that, we're going to start on the passenger side. We have to remove this panel here and then the kick panel to access the wiring. To remove this panel, just reach underneath here, give it a good tug and it'll pop right up. Same thing with the kick panel; pull up, pull out. What you want to do now is lift up right where this metal tab is that holds your weather stripping in place. If you look, there's a little cutout right here and also right here. This is where we're going to take the wire from our door sill plate up over inside and then up to the kick panel to connect it.

Now, these are side-specific. The wire is going to come off the front of the door sill plate. What you're going to do is kind of just line it up in the plastic. Get an idea of where it's going to go. It's going to be right there, then sort of feed the wire through the area where it's going to pass. Now, we're going to prep our factory door sill plate for installation. Now, if you've ever put Armor All, silicone, anything to make these shiny, you have to get some dish soap mixed together with some water and clean this thoroughly to give it more of a rough texture. In our case, we know ours are stock. We've never done that with them, so we're going to go right to some alcohol to clean the surface. Again, focus on, obviously, where the tape is going to sit.

With the surface clean, I'm going to peel back our red tape now. Now, before we install it, we're going to use the adhesion promoter provided with the kit. Now, this is not a cleaner. All this is going to do is just basically make it adhere better. It's almost like a primer. What you want to do is make sure it is clean and don't touch this stuff, either. Just take the top of it off like that and then wipe it on the area. Give it a couple seconds to set up. Flip it back over, make sure it's lined up, and push it down. Just hold it for 20 or 30 seconds, make sure it's nice and adhered. Now you can move on to the wiring.

What we're going to do now is disconnect this plug right here. Lift up on this plastic tab. Once you have it disconnected, the wire we want to use is right on the end here ... pull it out a bit more. It's going to be a gray wire with a purple tracer. This is going to have power when the doors are open for a dome light, courtesy light, or whatever. It's the perfect choice to plug in for our door sill lights. We're going to get power from here and then get ground from this bracket right here. Now, what I suggest doing here is actually not what I did. I would suggest using a wiretap. Unfortunately, when we tried to put the tap on, we actually cut through the wire by mistake, so we're going to use a butt connector to make the connection. But, don't cut through the wire, just get a wiretap and tap in that way.

I'm going to put a terminal on the ground wire. I'll remove this nut, here, and this will be our ground. Now, before we put everything back together, connect the negative and see if it works ... connect our ground. If it's connected, it should light up. I should mention, when you do the driver's side, it's the exact same process. You can fish the wires across the dash and make the same connections over on this side and connect them both in the same place. With everything good, we can reinstall the kick panel and then we'll line up and reinstall the inner door sill and your installation is finished.

These stainless steel door sill plates from American Car Craft will add a nice custom touch to the interior of any base model 2015 through 2017 Mustang. Now, I should mention they're available in the red shown here, also available in a white or a blue. These are made in the USA and a fairly easy installation. There is some wiring involved, but figure about one or two hours and be back on the road in no time.