American Racing VN527 Shelby Cobra Wheel 17"x7" Mag Gray With Machined Lip 1965-1973
American Racing Mag Gray 17" x 7" VN527 Shelby Cobra Wheel with a Machined Lip for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.
If you are a Shelby Cobra lover then you need to check out this American Racing wheel. This wheel is reminiscent of the classic Shelby Cobras and will look phenomenal on your 1965-1973 Ford Mustang!
This wheel (VN52777012400) has the legendary 10-spoke Shelby Cobra styling. American Racing has finished this fabulous wheel in mag gray with a polished, machined lip. It features a one-piece design constructed from cast aluminum and includes a matching center cap to finish off the wheel. American Racing's 17" x 7" VN527 wheel is available individually or as a set of four.
- Size: 17" x 7"
- Bolt Pattern: 5 x 4.5"
- Finish: Mag Gray with Machined Lip
- Offset: 0
- Backspacing 4"
- Hub Bore: 76.5mm
- Center Cap: Included
Please Note: This wheel is designed to fit most 5-lug 1965-1973 Mustangs with the correct 5 x 4.5" bolt pattern and backspacing size. However, the aggressive diameter and width of the wheel is far larger than any factory wheel found on 1965-1973 Mustangs. Please check fitment before ordering, as modifications may, or will be necessary.
Tire Fitment Recommendations:
- For 1965-1966, 225/45-17 tires are recommended with 17x7" wheels but will require modifications for correct fit.
- For 1967-1968, 235/45-17 tires are recommended with 17x7" wheels.
- For 1969-1973, 245/45-17 tires are recommended with 17x7" wheels.
One of the best ways to set your classic Mustang apart on the road and in the showroom is with a new set of wheels. CJ Pony Parts carries an extensive and ever-growing inventory of traditionally styled, restomod and modernly designed wheels to compliment your individual Pony's personality. CJ Pony Parts also carries a variety of tires to match with these wheels, and wheel and tire sets come pre-mounted and balanced for a ready-to-bolt-on installation.
Purchase this American Racing (VN52777012400) Mag Gray 17" x 7" VN527 Shelby Cobra Wheel with a Machined Lip for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!
The VN527 wheel from American Racing features a legendary 10-spoke Shelby Cobra style and comes in a mag-gray finish with a polished lip. It's available in several different sizes. This one shown here is going to be a 17" X 7" wheel. Should be used on the front or back of your 1965 through 1973 Mustang. This features a 4" backspace and the correct 5 X 4-1/2 bolt pattern.
These American Racing wheels include the center capper. Available individually or as a set of four. Staggered packages and entire packages are also available.