AMP Research BedStep Kit Jeep Wrangler JK 2007-2018
AMP Research BedStep Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
The BedStep Kit from AMP Research is a retractable bumper step designed specifically for your 2007-2018 Jeep Wrangler JK. This strong and rugged step quickly flips down with the nudge of your foot, giving you a faster, easier and safer way to load and unload cargo from your JK!
Features and Benefits of the AMP Research BedStep Kit (75311-01A):
- Die-cast aluminum construction
- Black anodized finish with PFTE coating
- Resists corrosion
- Stainless steel hinges
- Ridged, non-slip step surface
- Lightweight and durable design
- Mounts to frame
- Supports up to 300 lbs
- Easy bolt-on installation
- Proudly made in the USA
The BedStep mounts to your Wrangler's frame under the rear bumper so it works even with an open tailgate or when towing. It is designed to perform flawlessly in snow, ice, dust, mud and dirt. This lightweight, yet rock-solid tailgate access step employs a rugged die-cast aluminum alloy linkage assembly. It is black-anodized and PFTE coated for maximum corrosion protection.
Precision stainless steel hinge points and press-fit bushings ensure trouble-free action and reliable maintenance-free operation for decades. Die-cast-aluminum alloy linkage components and precision-machined pivot points give the BedStep rock-solid stability. Teflon powder-coating ensures years of trouble-free, corrosion-proof operation. The ridged, non-slip step is molded of strong glass-reinforced resin, for safe footing even in mud, snow or ice. This kit is designed and manufactured in the USA.
AMP Research is an American design and technology company, located in Tustin, California, that invents, builds and markets products designed to improve the function and utility of cars, light trucks and SUVs. The company’s motto ”Innovation In Motion™” captures the eclectic mix of breakthrough products AMP Research has brought to the market since its founding in 1980.
Order AMP Research's 75311-01A BedStep Kit for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
If you store cargo on the roof of your jeep, this BEDSTEP is gonna make your life a whole lot easier. It's made of high-quality aluminum with stainless steel hinges, with a high-quality powder-coat finish for durability and corrosion-resistant.
It's gonna allow you to easily access the roof of your Jeep and it can hold up to 300 pounds. The best part is it's super easy to install.
Tools you'll need for this installation. A 13-millimeter socket, 16-millimeter socket, an extension, 3'8" ratchet, and a T-25 Torx bit.
Alright, we have our Jeep up in the air. You don't need to put your Jeep up in the air, you can simply do this on the ground. Ours is up in the air just for filming purposes. The first thing we're gonna do is remove three bolts right up here.
Remove these two nuts on the body mount. They're 17 millimeter.
Remove this bolt right here, as well, 17 millimeter.
Next thing you're gonna wanna do is grab this bracket that's supplied with the kit and you're gonna put it inside the frame here. There's a hole on the inside or outside of the frame you can install it through.
We have this body lift right here and this washer's preventing it from going in on the inside hole, so we're gonna go through the other side.
When you install this bracket, make sure the threaded hole is on the bottom and you're gonna line it up with this hole right here.
We're over at the workbench now. We're gonna install our mounting bracket on our linkage. Have your linkage positioned just like this and put the mounting bracket on top just like that.
Then install the two bolts that come with the kit.
Install the mounting bracket over the two studs for the body mount. Reinstall the two nuts.
Thread the bolt in but don't fully tighten it just yet.
Last bolt you need to install is one right here, and this is gonna go into the bracket that you installed in the frame.
Now you can tighten all the bolts.
We're gonna tighten up the two nuts on the body mount.
Alright, now that that's tightened up, we can install the step.
Grab the step and put it onto your linkage. Now you can install the three screws on the bottom.
Install the three screws with the T-25 Torx bit.
Once you get the last screw tightened, your installation is finished.
Okay, our AMP Research BEDSTEP is installed. Installation was super easy. It fit absolutely perfect. It can hold my weight without a problem. Installation should only take you about 30 to 45 minutes, and before you know it you'll be heading off-road.