Anderson Composites Rear Spoiler Pedestal Type-AT Carbon Fiber Fastback 2015-2020
Anderson Composites Rear Spoiler Pedestal Type-AT Carbon Fiber Fastback 2015-2019 is rated out of 5 by 4.
- Lightweight And Strong
- Premium Wet Carbon Fiber
- Durable High Gloss Finish
- 2015-2020 Fastback Only
You save 10%
Rated 4 out of 5 by bswartzwelder from Love the looks I love the looks of this spoiler. It is one of the nicest units I have seen online. It also looks more like it was a factory option and not an add-on piece. I almost wish it had been offered as pre-painted. Although I just purchased a pre-painted hood scoop from another supplier, when it arrived, the color match was horrible. Both the scoop and the spoiler are in the paint shop right now and I hope they are finished by this weekend so I can install them both. It would have been nice if they would have included some kind of template for drilling the holes, but I made my own and it looks like I got it right.
Date published: 2016-04-15
Rated 5 out of 5 by Orange1 from Anderson Composites Rear Spoiler Pedestal Type-AT I ordered the Anderson Composites Rear Spoiler Pedestal Type-AT last weekend and got it delivered to Sweden this Thursday. Very good service again from CJ Ponny Parts! Just mounted the spoiler and the Car looks great!. The mounting was not the easiest but I did a mounting template of paper before drilling. Drilled bigger holes from the inside to be able to get the bolts on. The inside holes are now covered with rubber washers. all in all very good quality and it fits perfect.
Date published: 2016-05-13
Rated 5 out of 5 by Briane1775 from Pimp my ride! But seriously folks... Bought just over 2 weeks ago. Pros....Looks fantastic, does the job as a proper down force wing, not the hardest of things to fit, strong and robust. A little on the expensive side but you get what you pay for....quality! Cons.....No template included, no fitting instructions, larger holes have to be drilled on inside to accommodate washers and socket. For the money the fitting kit could be better i . e. Blank rubber grommets for holes and UV treated or treatment for wing. UV Polish for example. Overall massive recommend! 9.5 out of 10. Would be a full ten but for the above.
Date published: 2016-11-11
Rated 5 out of 5 by KGDUDE from Stunning look and quality I purchased this spoiler knowing it had no instructions so l was a bit apprehensive fitting it myself and in the end it was straight forward.The kit includes 6 plastic strips 6" long and1/2" wide which have a locating nipple in the centre of them.Push the nipples into the 6 threaded mounting holes of the spoiler.Place the spoiler on the trunk,it will sit in the curved part of the trunk so your adjustment will be left or right to get centre.Tape down the plastic strips to the trunk and then carefully lift the spoiler off the trunk.The plastic strips should still be taped in position.The nipples have a hole through the centre so you can push a punch through it to mark the trunk.Drill 6mm holes from the top and16mm holes from the underside.You will need 2 blanking grommets for 16mm holes,the other 4 holes are covered by the trunk fabric panel.THERE IS NO NEED TO MAKE A TEMPLATE. I am very happy with the install and the look
Date published: 2017-03-25
So if this spoiler doesn't use the existing mounting holes from stock spoiler, does it cover them so they are not seen from outside
No, not all of them. There is somewhere in the neighborhood of 7-9 holes drilled all along the edge of the trunk lid on S550's equipped with a spoiler. You would either have to plug the holes or have a body shop fill them and then repaint your trunk lid. Another good option is to trade trunk lids with someone that has the same color car as you and doesn't have a spoiler installed. This way you can start fresh.
Date published: 2017-09-08
will it cover the factory spoiler holes?
No, the Anderson Composites Type-AT Pedestal Rear Spoiler does NOT use the factory mounting holes that may be left behind after removal of your OE rear spoiler. You WILL be required to drill new holes in your trunk lid.
Date published: 2017-06-15
Does this spoiler come with drilling templates? Can you supply it pre painted?
C'mon Bill, Template and instruction video for us newbies!
Date published: 2017-05-04
Does it have to be painted or can you fit it straight from the box? I.e. have the carbon fibre look in black? Or will it have to be painted for protection from uv light and weather etc? Many thanks for your help.
It can be installed straight out of the box but it is recommended to use an automotive clear with UV inhibitors to prolong the life and finish of the product.
Date published: 2017-07-22
Can this spoiler be sent to New Zealand and paid by Credit Card.
To get a shipping quote and total price, add the item(s) to your shopping cart and then proceed to checkout. In checkout, fill out your address info and scroll down to see shipping options and costs to your area including any import taxes and duties.
Date published: 2017-04-08
does this fit the 2016 gt premium
It will if its a fastback.
Date published: 2018-02-18
Complete Your Package