Anderson Composites Side Skirt/Splitter Type-AR Carbon Fiber Pair V6/EcoBoost/GT 2015-2020

Anderson Composites:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 4.85ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Lightweight And Strong
  • Premium Wet Carbon Fiber
  • Durable High Gloss Finish
  • 15-19 V6, EcoBoost & Base GT
MSRP $899.00
You save 10%

Pair of Anderson Composites Carbon Fiber Type-AR Side Skirts/Splitters for all 2015, 2016, 2017, 2018, 2019 and 2020 V6, EcoBoost and GT Mustangs.

If you are in the market to add high-quality Carbon Fiber components to your 2015-2020 V6, EcoBoost and GT Mustang, then look no further then Anderson Composites. Their Type-AR Side Skirts/Splitters (P/N: AC-SS15FDMU-AR) will truly change the exterior appearance of your S550 with a beautifully designed Carbon Fiber replacement!

This pair of Type-AR Side Skirts/Splitters from Anderson Composites is a direct replacement for your factory side skirts/splitters. It will easily take the place of the existing side skirts/splitters on your V6, EcoBoost and GT Mustang and reuse the original hardware. The high-quality wet carbon fiber construction is not only lightweight, but it is also exceptionally strong and built to last. Featuring a high-gloss finish that will show off the weave of the meticulous hand laid carbon fiber, this pair of side skirts/splitters will also have much more aggressive dimensions on your 2015-2020 Mustang.

Features and Benefits:
- Direct Replacement for OE Side Skirts/Splitters
- Reuses Your Existing Side Skirt/Splitter Hardware
- High-Quality Wet Carbon Fiber Construction
- Lightweight and Strong 1-Piece Design
- Durable High-Gloss Finish
- Creates Much More Aggressive Dimensions
- Sold as a Pair
- Fits all 2015-2020 V6, EcoBoost and GT Mustangs

*Will not fit GT350, GT350R or Vehicles equipped with the Roush Winglets.

Please Note: It is highly recommended to use an automotive clear with UV inhibitors to prolong the life and finish of the product.

Anderson Composites specializes in fiberglass and carbon fiber components for late-model Mustangs. They manufacture each and every one of their products with the upmost attention to detail and only use top-grade materials for a quality product you can trust. Their extensive manufacturing experience allows them to construct everything from hoods, trunk lids, front and rear spoilers, side skirts/splitters and much more. Anderson Composites’ precision and attention to detail used to make their products is a science of its own and their craftsmanship is simply unmatched.

California Residents: Proposition 65 Warning

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.08ms
  • bvseo-msg: HTTP status code of 404 was returned;

What is the difference between the AR and OE Skirt/splitter please?

Asked by: B8Cs
The AR is larger then the OE. The OE is meant to be the same size as the original side skirts, where as the AR is a bit more aggressive and comes out slightly farther.
Answered by: CJPP Dave
Date published: 2019-02-09

Do you by any chance sell the winglet that was apart of the install in the video?

Asked by: MustangRacer
Here is the link to the part that was used,
Answered by: rk cjpp
Date published: 2017-04-21
  • y_2020, m_6, d_5, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_GER15, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 4.81ms