ARB Bumper Kit Summit Series Front/Rear W/ Rock Sliders/Skid Plates 4-Door Bronco 2021-2024

Overhaul your 2021-2024 4-Door Bronco’s stock body with an ARB Summit Series Front and Rear Bumper Kit with Rock Sliders and Skid Plates! This armor kit will get your Bronco ready to take on the toughest trails and is packed with features that are essential to the Overlanding lifestyle.

The Summit Series Front Bumper is constructed of durable steel and finished in an EDP20 bottom coat topped with an Integrit black textured powder coating for ultimate corrosion resistance. This bumper is compatible with winches up to 10,000 lbs. and has built-in twin jack points as well as twin forged, bar-mounted recovery points. It clears up to 37” tires and is compatible with the OE LED fog lights.

 Front Bumper Features and Benefits:
- Compatible w/ Winches up to 10,000 Lbs.
- Durable Steel Construction
- Twin Jack Points in Lower Pan
- Twin Forged Bar-Mounted Recovery Points
- Clears a 37” Tire (suitable suspension lift and rim off set required)
- Approximate Weight of Bumper, Chassis Mounts, and Fitting Kit is 172 Lbs.
- EDP20 E-Coating Under Powder Coating
- Finished in Integrit Black Textured Powder Coat
- Integrated Grille Guard
- Compatible with OE LED Fog Lights

The rear bumper also has a high-quality steel construction finished in a Zinc-rich primer bottom coat with an Integrit black textured top powder coating to keep rust at bay. A pair of twin jack points are situated in the outer wings while the rear parking sensors and OE tow bar are housed in a vintage silver center panel. This bumper is built for wide fender flares and comes with an LED license plate relocation kit that mounts your rear plate to the spare wheel.

Rear Bumper Features and Benefits:
- Durable Steel Construction Delivers Maximum Protection
- Twin Jack Points in Outer Wings Suit ARB Jack or Mechanical Jacks
- LED License Plate Relocation Kit
- Compatible with Rear Parking Sensors and OE Tow Bar
- Zinc-Rich Primer for Corrosion Resistance
- Finished in Integrit Black Textured Powder Coat
- Vintage Silver Center Panel Houses the 2 Central Sensors and OE Tow Bar
- Designed for Wide Fender Flares

The included rock sliders are 4-door-Bronco-specific, ensuring a perfect and secure fit. Each slider is made of 4mm laser-cut, multi-folded, pulse-welded sheet steel and finished in an Integrit textured black powder coating for ultimate durability. These sliders mount directly to the chassis rail and will not restrict ramp over angle.

Rock Sliders Features and Benefits:
- Vehicle-Specific Design Intended Only for 4-Door Broncos
- Strong Steel Construction for Maximum Protection
- 4mm Laser Cut, Multi-Folded, and Pulse Welded Sheet Steel
- Integrit Textured Black Powder Coat Finish
- Sliders Weigh Approximately 121 Lbs.

This kit is complete with a set of laser-cut 3mm press-formed steel skid plates with Zinc plating and a rust-resistant powder coating. These plates mount directly to your undercarriage and shield critical drivetrain components from off-road obstacles. You’ll receive a total of four panels for total protection!

Skid Plates Features and Benefits:
- Laser Cut for Precise Fit
- 3mm Press-Formed Steel
- Zinc Plated and Powder Coated
- Reflects Silver Textured Finish
- Includes (4) Panels for Total Coverage

Tech Tip: Painting the parking sensors is not recommended due to the potential unknown effect on the operation of the sensors. Sensor plugs are included for vehicles without parking sensors.

Additional Specifications:
- Laser cut provisions are provided in the pan and each wing of each bumper for the OE front parking sensors. These sensors have been mapped and their performance is closely replicated with these new bumpers. Test results show that sensor performance is replicated as close as practical with the change in the height of the sensors’ location.

- The ARB bumpers incorporate provisions for the relocation of the Adaptive Cruise Control radar unit to a position that is 8” forward, 3” right, and 5” higher than the OE position. The standard OE Adaptive Cruise Control cover and adjustment are retained.

- These Bumpers feature dual, bar-mounted, 8T-rated, forged recovery points. The points are rated to 8T in a direction of pull up to the maximum turn angle of the front wheels.

- Each bumper comes standard with two reinforced high lift jacking points fitted to the center pan, perfect for use with the ARB Jack.