ARB Differential Cover Red For Front Dana 30 Axle Sport/Sahara Jeep Wrangler TJ 1997-2006/ JK 2007-2018

ARB:
0750002

Highlights

  • Includes Mounting Hardware
  • Red Powder Coated Finish
  • For Dana 30 Axles
  • Easy Installation
$170.00

ARB Red Differential Cover for 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Sport and Sahara Jeep TJ and JK Wranglers with a Front Dana 30 Axle.

Ensure the differential on your rugged 1997-2018 Sport or Sahara Jeep TJ or JK Wrangler with a Front Dana 30 Axle has the coverage and protection it should when you’re smashing the trails during an off-road adventure with this ARB 0750002 Red Differential Cover. This cover will ensure rocks, mud, dirt or anything else that kicks up under your rig won’t damage your drivetrain.

Features and Benefits:
- Works with Sport or Sahara Jeep JK or TJ Wranglers with a front Dana 30 axle
- Computer optimized cross brace design increases the structural rigidity of the whole axle
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth
- Greatly increasing ring and pinion life and overall maximum load strength
- Neodymium magnets in drain plug and dipstick to collect metallic wear particles
- Magnet location in the end of the dipstick allows oil to be checked for signs of internal damage
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Approach/departure angle optimized by angled exterior surfaces
- Unique dipstick/filler cap allows differential oil level to be adjusted for customized high drive-line angles
- Durable red powder coated finish
- Easy to install

This cover not only shields your differential, it will protect your ring and pinion set through high-tensile nodular iron construction and a durable red powder coat finish. Boosting the structural integrity of your entire Dana 30 axle, this aftermarket differential cover employs a cross brace design that is computer optimized. Extending your overall maximum load ability and the life of your ring and pinion set, this differential cover assists in keeping your ring and pinion gears meshing on the flat faces of the teeth. Neodymium magnets are employed in the drain plug and dipstick to collect any metallic fragments or particles. Additionally, the location of the dipstick’s magnet will help you identify internal damage before it’s too late. Contributing to easy oil adjustments, the dipstick and filler cap are customized for high drive-line, approach and departure angles. This differential cover will have you protected for the trail in no time flat as it features an easy installation process.

ARB maintains its position as an innovator in the industry by utilizing the most modern, state of the art fabrication equipment and machinery. Today’s requirements for more complex designs are met by ARB with highly advanced, CNC sheet fabrication facilities.

Order this ARB 0750002 Red Differential Cover for your 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Sport or Sahara Jeep TJ or JK Wrangler with a Front Dana 30 Axle today from CJ Pony Parts.

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

Keeping your differential protected when you’re out enjoying the trails in your rugged 2007-2018 Sport or Sahara Jeep JK Wrangler with a Front Dana 30 Axle is crucially important. With that in mind, ARB has developed this (0750002B) Black Differential Cover to act as a shield that will repel debris varying in size from rocks and wood fragments to dirt and mud particles, keeping your differential safe and running smooth.

Features and Benefits:
- Works with Sport or Sahara Jeep JK Wranglers with a front Dana 30 axle
- Computer optimized cross brace design increases the structural rigidity of the whole axle
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth
- Greatly increasing ring and pinion life and overall maximum load strength
- Neodymium magnets in drain plug and dipstick to collect metallic wear particles
- Magnet location in the end of the dipstick allows oil to be checked for signs of internal damage
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Approach/departure angle optimized by angled exterior surfaces
- Unique dipstick/filler cap allows differential oil level to be adjusted for customized high drive-line angles
- Durable black powder coated finish
- Easy to install

This cover not only shields your differential, it will protect your ring and pinion set through the implementation of high-tensile nodular iron construction that is finished with a durable black powder coating. Enhancing the structural integrity of your entire front Dana 30 axle, this aftermarket differential cover employs a computer optimized cross brace design. Prolonging your overall maximum load ability and the life of your ring and pinion set, this differential cover helps keep your ring and pinion gears meshing on the flat faces of the teeth. To collect any metallic fragments or particles, neodymium magnets are employed in the dipstick and drain plug. The location of the dipstick’s magnet will help you identify internal damage before it causes deeper damage throughout your JK. Ensuring oil adjustments are quick and easy, the dipstick and filler cap feature a custom design for high drive-line, approach and departure angles. Easily installed, this differential cover will be in place and protecting your drivetrain in no time flat.

ARB maintains its position as an innovator in the industry by utilizing the most modern, state of the art fabrication equipment and machinery. Today’s requirements for more complex designs are met by ARB with highly advanced, CNC sheet fabrication facilities.

Order this ARB 0750002B Black Differential Cover for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Sport or Sahara Jeep JK Wrangler with a Front Dana 30 Axle today from CJ Pony Parts.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.