ARB Skid Plate Set 3.6L Jeep Wrangler JK 2012-2018
- 3mm Steel Construction
- Bolt On Installation
- Fits 12-18 JK Jeeps (3.6)
- Silver Textured Finish
Set of ARB Skid Plates for 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers with a 3.6L Engine.
Protect your 2012-2018 JK Wrangler’s undercarriage from damage during off-road excursions with this Set of Skid Plates (5450110) from ARB. These steel, zinc-plated skid plate panels bolt securely to your Jeep’s chassis for the ultimate underbody protection.
Features & Benefits:
- Fits 2012-2018 JK Wranglers with a 3.6 liter engine
- Designed to protect vital underbody components including steering, engine oil pan, transmission and transfer case (dependent on vehicle model)
- Constructed from folded 3mm laser cut steel
- Securely bolted to the chassis delivering outstanding structural integrity
- Steel components are zinc plated and powder coated in a silver textured finish
- Easily removed for vehicle servicing
- During servicing when panels are removed ensure fasteners are re-fitted to the correct torque values
This set of skid plate panels are developed with extensive field testing to warrant protection of your JK’s vital underbody workings. These panels remove easily for servicing and where practical, include access to oil pan drain plugs. Each skid plate panel has recessed mounting bolts in weaker areas to assure quick removal even if the panels are damaged from extreme off road use. These skid plate panels are some of the longest ones manufactured on the market and ARB engineered these panels to essentially cradle the entire engine oil pan on all sides, which will deliver the maximum amount of protection while still allowing access to the engine oil drain plug. Near the rear of the panel, the surface area is as narrow as possible for the fitment of aftermarket long arm kits. A new cross member has been developed that bolts between the two engine mounts to support these panels. ARB has carefully designed this set of skid plates to allow your JK’s front suspension control arms to travel up fully (under suspension compression) in an area that was very compact and didn’t allow a lot of freedom in design. Along with engine oil pan and transmission protection the JK Wrangler also has a vulnerable charcoal canister, which is part of the vehicle emissions system, which hangs low towards the rear of your Jeep. ARB has developed a separate skid plate for this specific area. This set includes an engine, transmission, transfer case skid plates and an EVAP canister skid plate.
*Inspect panels visually on a regular basis. Dirt and foreign matter should be washed out to minimize build-up around hot components. Be very careful when removing foreign matter with hands while vehicle is hot or running.
Please Note: This Set of Skid Plates will not fit 2007-2011 Jeep JK Wranglers with the 3.8 liter engine.
Order a Set of ARB (5450110) Skid Plates for your 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler with a 3.6L Engine from CJ Pony Parts today!
California Residents: Proposition 65 Warning