Armrest Mounting Screw Pair 1967-1973

CJ's Part Number:
HW236
Armrest Mounting Screw Pair 1967-1973 is rated 1.0 out of 5 by 2.
  • y_2019, m_11, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_HW236, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 115.75ms
  • REVIEWS, PRODUCT

Highlights

  • Direct-Fit Replacement
  • Durable Steel Construction
  • Bright Finish
  • Sold As A Pair
$2.99

Pair of Armrest Mounting Screws for all 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

Are you replacing the old and worn out armrest pads on your vintage 1967-1973 Mustang? If so, you're going to need the right pair of screws to get the job done. Order this Pair of Armrest Mounting Screws from CJ Pony Parts today!

This Pair of Armrest Mounting Screws will securely hold your new armrest pads in place, making for an easy installation job! This pair comes with two screws total, which will be enough for one armrest pad. If you want to mount new armrest pads on both side of your Mustang, you'll need to order two pairs.

Everyone notices the big pieces of your Mustang's interior. However, there are hundreds of pieces of hardware that holds everything together, which perform a vital job. CJ Pony Parts has a wide variety of Mustang interior hardware, so you can repair and replace all of your hardware when you're working on any projects in your interior.

Order a Pair of Armrest Mounting Screws for your 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 1 out of 5 by from TOO BIG!!! I bought these screws to go along with the standard arm rest pads for my 68 coupe. The head of the screws are way too big!!!! Good thing they were cheap!!
Date published: 2019-06-21
Rated 1 out of 5 by from Screwed I bought a set of these and they are way to big. the old ones were 3/8” head, these are 1/2” and the self tapping thread is way to big.
Date published: 2019-08-05
  • y_2019, m_11, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_HW236, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 8.39ms
  • REVIEWS, PRODUCT

i ordered these screws for new 67 mustang arm rests. They seem very large with a socket head and huge thread pattern. They do not seem to tighten very much onto the door bracket. Is this normal or do I have the wrong screws?

Asked by: joe1967
Please call toll free at 1-800-888-6473 and speak with a customer service rep.
Answered by: rk cjpp
Date published: 2018-07-30
  • y_2019, m_11, d_20, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_HW236, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 178.14ms
  • QUESTIONS, PRODUCT