Baer Brakes Front Brake System Extreme-Plus 14" 6-Lug Silver Chevrolet C10 1960-1987

Baer Brakes:
4301391S

Highlights

  • Proudly Made in the USA!
  • Silver Powder Coated Finish
  • Made to DOT Specifications
  • Hand-Painted Machined Logo
$3,795.00

Baer Brakes Silver 14" 6-Lug Extreme-Plus Front Brake System for 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 and 1987 Chevrolet C10s.

Does your Chevrolet C10 use CPP drop spindles and 6 x 5-1/2 inch wheel bolt patterns? If so, this Baer Brakes Silver 14" 6-Lug Extreme-Plus Front Brake System (4301391S) from CJ Pony Parts is the brake system for you!

This front system features the 6S 6-piston Monoblock caliper mounted to a 14 inch 2-piece slot, drill, zinc plated rotor. However, the caliper can also accept 13.5 to 16-inch rotors. The 6S Extreme-Plus Caliper uses the D1247 or DR11 race pad backing plate, a popular choice shared by many of its competitors. The calipers are available in a silver powder-coated finish with a hand-painted machined logo for a distinct look. The calipers feature stainless steel pistons, abutments and noise suppression springs. You'll also receive all the correct banjo-style fittings, as Baer doesn't use any pipe thread. This is the only 6-Piston forged monoblock offered to the road-going/street market!

Features and Benefits:
- US Made Forged MonoBlock Caliper
- Offers Exact Same Look Front and Rear
- Everything Needed Including Hoses and Fittings
- 6061 T-6 Billet Aluminum Hat Anodized Black and Bolted to the Rotor
- High-Grade U281 Fine Thread Stainless Hardware with Captured Nuts
- Set of 6061-T6 Billet Machined Hubs with Quality Bearings 
- Staggered Piston Sizes to Minimize Pad Wear

Baer systems include stainless steel brake hoses as well as calipers that have D.O.T. compliant dust/weather and pressure seals. Quality bearings are used, along with NAS high-grade stainless hardware for the pre-assembled 2-piece rotor. The hubs are also pre-assembled with bearings, races, studs and packed with Redline synthetic grease. The 6S and 6R R-Spec calipers are Baer's Flagship offering and are built of a single piece of US-sourced 2618 forged aluminum. This System is for a 6 x 5.50 wheel bolt pattern.

Vehicle Fitment:
- 1960-1987 Chevrolet C10 Truck and SUV With Classic Performance Products 2 Inch Drop Spindles
- CP30106-1 Fits 1960-1962 C-10
- CP30106-2 Fits 1963-1970 C-10
- CP30106-3 Fits 1971-1972 C-10
- CP30106-4 Fits 1973-1987 C-10

Please Note: Calipers require a minimum tire size of 18 inches.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following C10 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.