Baja Designs Lower A-Pillar Dual Light Mount Pair Jeep Wrangler JL 2018-2020/Jeep Gladiator 2020

Baja Designs:
447007

Highlights

  • Sold As A Pair
  • Steel Construction
  • Black Powder Coated Finish
  • Includes Mounting Hardware
MSRP $104.95
$94.46
You save 10%

Pair of Baja Designs Lower A-Pillar Dual Light Mounts for 2018, 2019 and 2020 Jeep JL Wranglers and all 2020 Jeep Gladiators.

If you want to see whatever is on the trail when you're behind the wheel of your 2018-2020 JL Wrangler or your 2020 Jeep Gladiator, than you'll need some extra exterior lights! Start the process by installing these high-quality Pair of Baja Designs Lower A-Pillar Dual Light Mounts (447007) available to purchase from CJ Pony Parts now! Place your order today!

A-Pillar Light Mounts Feature:
- Direct-fit upgrade
- Allows you to add two pairs (or four lights total) of S2 or Squadron LEDs or one 40" S8 light bar (all lights sold separately)
- Pair of two (2) mounting brackets include hardware
- High-quality metal construction with durable black powder coat finish
- Provides additional light whenever you're off-road

It can be hard finding just the right mounting bracket when it comes to your all-new Jeep, but that's exactly why Baja Designs stepped up to the plate with these direct-fit lower a-pillar mounts! You'll get a pair of two (2) mounts that are constructed from durable metal with a rugged black powder coat finish, which makes them rugged enough to withstand practically anything. You can install a pair of S2 or Squadron LED lights, as well as an additional pair of lights or a 40" S8 light bar (lights all sold separately). You can either have the four individual LED lights, or one pair of the lights and one superior LED light bar--your choice! You'll get the necessary hardware to get your new brackets properly installed and secured, so browse around and choose the exact lights your rig needs and place your order now with CJ's!

Baja Designs strives to provide the best in off-road lighting solutions for your favorite truck or off-road vehicle! The LED light bars, LED lights and HID lights by Baja Designs have been at the forefront of off-road lighting for more than 20 years, and CJ Pony Parts is proud to now offer these high-quality lighting options! Browse around and place our order for upgraded LEDs with CJ's today!

Go ahead and order this brand-new upgraded Pair of Baja Designs 447007 Lower A-Pillar Dual Light Mounts for your 2018-2020 Jeep JL Wrangler or your 2020 Jeep Gladiator today from CJ Pony Parts!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

If you're looking to add some lights to the front end of your JL, today we're going to be installing this Baja Designs lower A-pillar dual light mount bracket fitting your 2018 JL Wrangler. This Baja Designs light bracket is featured out of CNC precision cut steel and then powder coated in a satin black. It includes all the necessary hardware to get two lights mounted up on your windshield or add a 40 inch light bar across the front of it. With that being said, we're going to get it mounted up on our JL Wrangler and see how it looks.

The first step of this installing is to remove the two bolts that hold on this cowl panel right here. You're going to use a T30 Torx bit socket, so let's get started. You can set these aside. You will not be reusing them.

Now, we're going to do this on the passenger side, and as you can see, this is the passenger side bracket. It's going to have the smaller mount here for your pod light as well as up front if you decide to run a 40 inch. You're going to put it on in this manner, but first we're going to put the spacers down, so let's do that. Set your spacers into place, go ahead and set your bracket over top of them, then use the provided hardware to go through into the factory mounting locations. Get the front one started and move onto the rear. Then we'll get them tightened up with a 10 millimeter socket. Now, once it's tightened up, we're going to repeat the same process on the other side.

That wraps up the installation of this Baja Designs dual A-pillar lower bracket on our 2018 JL Wrangler. As you can see, we've got two Baja Designs lights up there just to show you what it looks like. You can also mount a 40 inch right across the front of the hood, that's a pretty cool feature, and mount a bunch of other aftermarket lights. Now, to find all of your lighting needs as well as bracket needs for your JL, be sure to check out CJPonyParts.com.

Vehicle Fitment

This product will fit the following Gladiator years:

  • 2020

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.