BAK Fold-Away Utility Box BAKBox2 Chevrolet Silverado/GMC Sierra 2014-2020

BAK:
92120

Highlights

  • Premium Composite Panels
  • Sturdy No-Drill Install
  • Easily Folds Away
  • 10"X10"X Bed Width
MSRP $321.11
$299.00
You save 7%

BAK BAKBox2 Fold-Away Utility Box for 2014, 2015, 2016, 2017, 2018, 2019 and 2020 Chevrolet Silverados and GMC Sierras.

BAKBox2 Features and Benefits:
- Constructed from premium-quality 1/2" FRP composite panels
- Designed to work exclusively with BAKFlip and Revolver X2 rails
- Will perfectly fit all 2014-2018 Chevy Silverado truck bed configurations
- Sturdy no-drill install simply clamps into place
- Easily folds away for complete bed access
- Includes sliding tray for additional storage
- Box measures 10"x10"x bed width

If you already have one of BAK's revolutionary folding or rolling covers, than you know how amazing their products are. This new BAKBox2 utility box offers the same premium-quality construction and industry-leading functionality! This toolbox is constructed from super-light but incredibly-strong FRP composite panels and simply folds away when not in use, meaning you''ll have complete access to your entire truck bed whenever you want it. No more worrying if your load will fit around that bulky toolbox, BAK's fold-away box is there whenever you need it and simply folds flat whenever you don't. It sits below your bed, meaning you'll always be able to have complete visibility out of your rear window as well as a sleek looking back bed. Add some extra storage and organization to your new Chevy truck and pick up this BAKBox2 today from CJ's!

Please Note: This toolbox will fit any 2014-2017 Chevrolet Silverado or GMC Sierra already equipped with a BAKFlip folding cover (26121 or 26120) or Revolver X2 rolling cover (39120 or 39121).

California Residents: Proposition 65 Warning

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Installation Videos

Video Transcript

One of the great things about owning a truck being able to haul and store items in the bed but if you let loose items roll around it can damage the bed or the items themselves today we're going to make our bed a little bit safer and cleaner by installing this BAK Industries foldaway utility box. This BAK Industries foldaway utility BAK Box Two is constructed of Half inch FRP composite panels to make it super lightweight and easy to fold up when not in use. It'll work perfectly with the Backflip and RevolverX2 bedcovers and includes a sliding tray for additional storage. It's going to be super easy to install so today we're going to show you how to install it using our 2016 Silverado.

Before we actually install this on the truck, the first thing we're going to do is install the side panels right here on the table. Grab the two larger brackets with only two holes in it they're labeled C then you're going to install a U nut behind each hole. Grab your side panel and put a bolt through these two holes then thread those bolts into the C bracket that you just put the U nuts on. You only need to get these bolts started, you don't need to tighten them just yet. I'm going to repeat the process for the other side panel.

These brackets are designed to work with this side rail there's a small lip right in here where it'll slide in and you can put this anywhere where you want on this rail. You can put it up here or even all the way back there. Slide into the lip then you can tighten the screws but don't tighten them all the way, you want them a little bit loose just for some adjustment when you actually install the box. With this one installed we're going to install the other plate as well.

With both side plates installed you can install the box now. When you install it make sure the logo is facing toward the tailgate. We'll then place the Velcro. You're going to flip the back of the box up and install a bolt and nut through each one of these four holes on each side. Then repeat the process on the other side. Once you get the eight bolts in and its loosely installed, then tighten these side plates. Once you get the side plates tightened up then you can tighten up the eight nuts and screws. Tighten up the nuts and screws using a Phillips head screwdriver and a 9 mm wrench. You can put the tray in when you're finished or if you want you can leave it out and fold up the box for storage. Then your installation is finished.

Our BAK Industries storage organizer is installed. It's definitely going to help out keeping our bed more organized and safe. Installation was super easy, it's only going to take about half hour and before you know it you'll be heading off road.

Vehicle Fitment

This product will fit the following Sierra years:

  • 2014,
  • 2015,
  • 2016,
  • 2017,
  • 2018,
  • 2019,
  • 2020,

This product will fit the following Silverado years:

  • 2014,
  • 2015,
  • 2016,
  • 2017,
  • 2018,
  • 2019,
  • 2020,
Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.