BAK Hard Rolling Cover Revolver X2 With 5.5' Bed Chevrolet Silverado/GMC Sierra 1500 2004-2013
BAK Revolver X2 Hard Rolling Cover for all 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013 Chevrolet Silverado 1500s and GMC Sierra 1500s with a Short Box.
If you use your 2004-2013 Chevrolet Silverado or GMC Sierra to haul cargo, then chances are you're going to want a tonneau cover to help keep that cargo safe and secure. So if you're in the market for a new Silverado or Sierra bed cover, why not take a closer look at this BAK Revolver X2 Hard Rolling Cover from CJ Pony Parts? It's simple to install and operate, and it uses state-of-the-art dual locking security to keep your cargo right where it belongs.
Features & Benefits:
- Provides Unparalleled Strength, Security and Style
- Can Handle More Than 400 lbs. of Evenly Distributed Weight
- Allows Use of Every Inch of Truck Bed without Blocking Rear Window
- Allows for 100% Unobstructed Access to Truck Bed and Stake Pocket Holes
- State-of-the-Art Dual Locking Security
- Patented Automatic Rotational Locking Rails Secure Cover Over Entire Bed on Each Side
- Secured in Open Position by Sturdy Buckles for Safe Driving without Blocking Back Window
- Multiple Automatic Latching Systems Lock Cover Down as It’s Rolled Closed
- Seals and Hinges Will Never Fail
- Simple to Roll Up with One-Handed Operation: No Lifting Needed
- Can Be Opened and Closed in Increments
- Clean Look: No Velcro or Stitching
- Flush-Mount Razor-Slim Design: Follows Truck Contours for a Perfect Fit
- Impact- and Scratch-Resistant Surface Made of FRB Impregnated Vinyl and Supported by Full Aluminum Sub-Structure
- Top Vinyl Surface Stays Cool to the Touch
- All-Weather Resistance: Withstands Hail, Ice, Snow and More
- Designed to Last the Entire Life of Your Pick-Up Truck
- Great for Hauling Trailers, 5th Wheels and More
- Works with Racks, Tie Downs, Bed Rails, Bed Caps, Bed Liners and BAKBox Toolboxes
- Easy to Install: No-Drill, Clamp-On Installation
- Made in the USA
This BAK 39100 Revolver X2 Hard Rolling Cover provides unmatched strength and security while still looking stylish at the same time! This hard rolling cover can easily handle more than 400 lbs. of evenly distributed weight without blocking your rear view mirror while still allowing you to access and use your entire truck bed and stake pocket holes. This tonneau cover's patented automatic rotational locking rails will quickly and easily secure it over your truck bed on each side, and its multiple latching systems will lock the cover down when it's rolled closed. When you're ready to open this hard rolling cover, it'll be secured in the open position with sturdy buckles so you can safely drive down the road with no obstruction blocking your rear window. Plus, this cover's strong and durable hinges and seals are designed to never fail, which means this tonneau cover should last the entire life of your pick-up! You can even open and close this cover in increments if you want, and using it is a simple one-handed operation that doesn't require any lifting.
But this hard rolling cover is more than just practical! It's also a great aftermarket truck accessory since it looks good too. Its flush-mount razor-slim design will follow your truck's contours for a perfect fit, and its scratch- and impact-resistant FRB impregnated vinyl surface will always stay nice and cool to the touch. Even better? You'll never have to worry about a severe hail or rain storm damaging it since this cover is resistant to just about any type of weather event you can think of! Installation is a simple no-drill, clamp-on install process that won't take you long. This tonneau cover works great with racks, tie downs, bed liners, tool boxes and more, and it's proudly made in the USA.
Order a BAK 39100 Revolver X2 Hard Rolling Cover for your 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 or 2013 Chevrolet Silverado 1500 or GMC Sierra 1500 with a Short Box from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
For this installation, you'll need an 3/8 ratchet, half inch socket, 9/16 socket and a pair of scissors.
The first step of the installation is to seal the front of the bed. The kit comes with two different seals. If you have a drop-in bed liner, you're going to use the thinner seal. If you have a spray bed liner like we have, or no bed liner at all, you're going to use the thicker seal. Peel the backing off, and lay the seal all the way across and trim it to fit. Peel the backing off, probably don't want to do it all at once. Do little by little. Line it all the way up against the rail and work your way across the top of the bed. Once you get it to the edge, trim it to fit.
To install the rails, you'll notice each one has this little bracket on it. This bracket is going to go towards the front of the bed facing the inside. You'll also notice there's a pad on here. If you have a drop-in bed liner, you'll remove this pad. If you have a spray-on bed liner or no bed liner at all, you leave this on. Then when you're ready to install it, just simply set it on top of the bed rail and slide it down.
With the rail in place, you can install a lock on the front of the rail. It goes in-between the bed and the rail. Slide it up as far as you can, then tighten it all the way with a 9/16 socket. Install the third one, and repeat the same process on the other side. With both rails installed, you can install the cover. You might need some help lifting it up. What you're going to do, going to lay this upfront, and then roll it all the way back and then roll again.
When you roll the cover up, you'll notice these two slots. You're going to install a bolt in each slot on each side. Then what you're going to do, you're going to roll the cover to get these bolts to slide into the bracket. Before you install the nuts on the bottom of those bolts, make sure the cover is centered, squared and it locks before you tighten it in place. Now that you know it's good, you can roll it back up and tighten the nuts.
To open the cover, pull down on this cable right here. That'll unlock it. First, install the nylon washer, then the metal washer, then the nut. Tighten the nuts with a half inch socket, then tighten the other side. The kit comes with these four pieces of weather stripping. You're going to apply this to the roller, just so the roller doesn't hit the glass and crack your glass. Now if this thing were going to roll up and hit the glass, the weather stripping will hit the glass and not the aluminum.
The final part of this installation is installing the strap. Place the mount right next to the furthest forward mount that you installed, as far forward as you can, and then tighten it. Then you can put the strap over the roller, clip it into place, then tighten it. Then repeat the process on the other side. When everything's installed, you can roll it out and your installation's finished. Our BAK Industries Revolver X2 Tonneau cover is installed. Fitment is spot on. Installation was super-easy, it's only going to take about 45 minutes. Before you know it, you'll be heading off-road.
This product will fit the following Sierra years:
This product will fit the following Silverado years: