Barton Industries Reverse Lock Out Adapter Billet Black V6/EcoBoost/GT 2015-2020

Barton Industries:
2015BM-5C-BLK
Barton Industries Reverse Lock Out Adapter Billet Black V6/EcoBoost/GT 2015-2019 is rated 5.0 out of 5 by 14.
  • y_2019, m_11, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_HW3532, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 4.59ms
  • REVIEWS, PRODUCT

Highlights

  • Quick And Easy Installation
  • Includes Necessary Hardware
  • Replaces Weak Plastic Adapter
  • Made In The USA
MSRP $69.99
$59.99
You save 14%

Barton Industries Black Billet Reverse Lock Out Adapter for all 2015, 2016, 2017, 2018, 2019 and 2020 V6, EcoBoost and GT Mustangs with a Manual Transmission.

Several Manual Transmission S550 Owners have ran into issues with the plastic pull up collar that is located on the factory shift boot. To prevent any further issues, Barton Industries has developed this Black Billet Reverse Lock Out Adapter (P/N: 2015BM-5C-BLK) for your Manual Transmission equipped 2015-2020 Mustang V6, EcoBoost or GT!

Typically what happens is that the two plastic pieces that are glued together will come undone or wear out completely, breaking along that seam. Barton has listened to the community and created this 6061T6 Billet Aluminum Constructed piece as a solution. With a quick and easy installation using the provided hardware, you’ll replace all the plastic components in your factory shift boot and maintain a factory-like appearance with the powdercoated black finish. Like all of Barton Industries parts, this Reverse Lock Out Adapter is made right here, in the USA.

Features and Benefits:
- Quick and Easy Installation
- Includes Necessary Hardware
- Replaces Weak Plastic Adapter
- 6061T6 Billet Aluminum Construction
- Powdercoated Gloss Black Finish
- Made in the USA

Please Note: This Billet Reverse Lock Out Adapter will require you to disassemble your factory shift boot. Installation is made easy with the included zip tie that will connect your factory shift boot to your new Billet Reverse Lock Out Adapter.

*This adapter is designed to work with the factory shift knob or any aftermarket shift knob that is designed to be used with the reverse lock out mechanism. It will ONLY work with aftermarket shifters that retain the reverse lock out mechanism.
*This shift knob adapter is also compatible with HW3290 and HW3291 for 2015-2020 Mustang owners. 


While many Mustang owners profess a love for their manual transmission Mustang, a good shifter or shifter accessory can be the difference between a frustrating and fun driving experience for many Mustang owners. If you have a 2015-2016 Mustang, CJ Pony Parts recommends checking out shifters and accessories from Barton Industries. Theses extremely high quality products will definitely put the fun back into your driving and shifting experience.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Fantastic little piece Since I was updating the shifter boot, I decided to upgrade the lock out, I went the the Balck option to match the black and red styling I have going on. Install was straight forward. Only complaint was that the lock out was getting stuck inside the gt350 knob, even after the retention ring was removed from underneath. The fix was to take a dremel tool with a sanding bit and make a few rounds under the knob. After a few mins of grinding, the lock out moved as smooth as stock setup.
Date published: 2016-04-30
Rated 5 out of 5 by from The Trilogy All black Barton lockout adapter, shift knob adapter, and 5.0 shift knob give a cleaner look in my opinion. I just wish there was a leather boot trim replacement kit. This Barton part feels solid and with the shift knob adapter it makes a metallic click when they touch while placing the vehicle in reverse. I like it.
Date published: 2016-01-20
Rated 5 out of 5 by from Feels so much more solid, looks great, no rattles Just do it. It looks so great and makes the shift handle feel rock solid. I had some rattles with the stock plastic collar both from contact with the shaft and the knob, and resonating through the plastic. It was so hard to center. This fixed that easy. There is an integrated O-ring to dampen contact between the collar and shifter. This is a no-brainer.
Date published: 2017-11-04
Rated 5 out of 5 by from Excellent Upgrade I've had this installed on my 2015 GT for about a week now, and I really like it. I got the black adapter and it looks great with a white shift ball contrasting with my black cloth Recaros. The quality is excellent and it feels better to the touch than the wimpy plastic stock piece. The only issue I've noticed is that the adapter sometimes sticks in the pull-up/reverse mode if left in reverse for a while when parked. I'm not sure what is causing that, though it doesn't affect anything as long as I make sure the adapter drops back down after taking it out of reverse. I'm hoping the issue lessens with use. Installation was fairly easy, though I'd suggest you be extra careful when pulling the stock part off as that little white washer will go flying. I spent about 20 minutes trying to find that piece during my installation. Aside from that, it was pretty straightforward. All in all, it works great, feels great to the touch, and looks even better.
Date published: 2016-01-13
Rated 5 out of 5 by from Easy install, looks great! Fantastic piece. Really love the black. Easy install, once you get the shift boot surround unclipped. That part can be a bit unnerving I you haven't removed it before. Bill makes it look really easy on their car. Once you remove t a few times I'm sure it gets easier. Overall great product, feels solid, looks amazing!
Date published: 2016-05-13
Rated 5 out of 5 by from Huge upgrade over the two piece chrome original Install was a little tricky. I swapped out the stock shift knob as well. The knob came off easily but was hesitant on putting a lot of force on the tabs to release the stock lock out. Cutting of the cover was a little nerve racking too. Got it down with almost no mistakes. Took about 20 minutes to install.
Date published: 2019-07-21
Rated 5 out of 5 by from Looks nice... Got the Barton replacement collar for the shifter in my Mustang. Do not believe the video when it say easily remove the boot frame from the counsel. It took me 4 hours of gently/forceful persuasion to pull that thing off without breaking it.
Date published: 2017-06-13
Rated 5 out of 5 by from Love the look Installed a week ago with a new shift knob. Absolutely love the black on black look. Installation was a little trickier than I thought it would be. Need to be delicate when pulling apart the boot section.
Date published: 2016-02-17
  • y_2019, m_11, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_HW3532, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.51ms
  • REVIEWS, PRODUCT

i have a steeda tri axe shifter was looking to purchase this product is this comparable with my shiftier

Asked by: 5ohhhhh
This will ONLY work with aftermarket shifters that retain the reverse lock out mechanism.
Answered by: rk cjpp
Date published: 2018-12-20

I bought the Shift Knob 2-1/8" Rally Black With Light/Grabber Blue Shift Pattern 6-Speed And GT Logo along with the reverse lockout adapter. Am I missing a piece? I asked a friend to install and he said I was missing a piece to make the 2 parts work.

Asked by: MzMopar426
There shouldn't be any other parts needed.
Answered by: rk cjpp
Date published: 2018-11-19

Recently broke my reverse shifter lock out retainer located on my shifter itself (The one with the 3 clips) not the collar that slides up and down. Does Barton have a replacement that can be used with their lock out collar. If not do you have a solution.

Asked by: Cobra 2
It sounds like it would be best for you to check with your local Ford dealer for that replacement component. We do not offer that piece.
Answered by: CJPP Dave
Date published: 2018-01-02

Does this billet adapter fit a GT350 as well?

Asked by: Autobahn
This will not fit the GT350.
Answered by: rk cjpp
Date published: 2016-09-19

Will I require a shift knob adaptor with this reverse lock out modification to use an aftermarket shift knob that you have for the 2016 mustang gt?

Asked by: Cory1
As long as you are using a shift knob for a 15-16 mustang an adapter will not be needed.
Answered by: rk cjpp
Date published: 2016-03-08

Any issues using this with the Steeda Tri-Ax Short Throw Shifter, part # 555-7316??

Asked by: cKone5150
It will ONLY work with aftermarket shifters that retain the reverse lock out mechanism.
Answered by: rk cjpp
Date published: 2018-07-04
  • y_2019, m_11, d_20, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3-b1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_HW3532, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 4.12ms
  • QUESTIONS, PRODUCT