Barton Industries Reverse Lock Out Adapter Billet Brushed V6/EcoBoost/GT 2015-2020
Barton Industries Reverse Lock Out Adapter Billet Brushed V6/EcoBoost/GT 2015-2019 is rated out of 5 by 11.
- Quick And Easy Installation
- Includes Necessary Hardware
- Replaces Weak Plastic Adapter
- Made In The USA
You save 20%
Barton Industries Brushed Billet Reverse Lock Out Adapter for all 2015, 2016, 2017, 2018, 2019 and 2020 V6, EcoBoost and GT Mustangs with a Manual Transmission.
California Residents: Proposition 65 Warning
Rated 5 out of 5 by Genxer from Works better than the factory piece The factory reverse lockout adapter had a slight rattle at certain rpm from having my shifter mounted solid to the transmission. The Barton fixed that. It has oring on the I.D. that helps to isolate the adapter from the shift lever. It is also a nice looking part. When I first installed it seemed bit dull. A quick shine with metal polish and it popped nicely. The install is a bit tedious as removing the shifter boot is not easy. Be very careful and pull it up as evenly as possible. Other than that the install isn't bad. Overall I am very happy with my purchase. You would spend a lot more to get a machine shop to make one of these so the value is a no-brainer.
Date published: 2017-05-28
Rated 5 out of 5 by Cowboy1 from Solid Installed this while installing my Steeda Tri-Ax short throw shifter. Well machined solid piece of aluminum that want break.
Date published: 2016-03-07
Rated 5 out of 5 by Ted G from Wonderful upgrade over stock! I installed this reverse lock-out collar last weekend combined with a Steeda Tri-Ax short-throw shifter. The collar fits perfectly together with the Tri-Ax. It looks far better than the stock plastic part and feels very solid when you shift into reverse. The CJPP installation video was spot-on and it only took me about 10 minutes to remove the stock piece, widen the opening in the leather boot and put in the Barton collar. What a great interior upgrade!
Date published: 2016-04-21
Rated 5 out of 5 by MikeD from Barton Reverse Lockout After only 14,000 miles the reverse lockout collar broke and i could get into reverse. I watched the video on how to release it and purchased the Barton Industries reverse lockout collar and installed it as shown in the video. It works great and won't hesitate to recommend it from CJ Pony parts.
Date published: 2019-04-30
Rated 5 out of 5 by Petestang from Easier than I expected It looks better than the original and feels much more solid. I have confidence that this piece will last as long as the car, or longer. Installation was easier than I expected. CJP's video was very helpful.
Date published: 2017-10-14
Rated 5 out of 5 by Burke985 from Fit on my 2018 GT Fit as intended with no issues, needed to remove mgw off my car and this replaced the factory reverse lockout since you have to cut it off when installing the mge.
Date published: 2018-06-29
Rated 5 out of 5 by Javamonster from Gotta have part for shifter This brushed adapter is a must have when upgrading shifter. The billet look is much better than the cheap plastic part ford installed.
Date published: 2016-02-02
Rated 5 out of 5 by Wedge65 from great fit and quality went with the Barton short throw shifter and had to upgrade the reverse lock out, a must for all manual drivers
Date published: 2016-05-06
Does this have the o-ring inside of the collar to prevent any rattling?
This does not include a o-ring.
Date published: 2019-03-05
I have a 1996 ford contour gl with a 5 speed manual transmission . My plastic rev. lock-out recently came apart . Do you stock anything that will work on my application and make my wife happy again ?
Date published: 2018-07-30
If I replace my GT Boot/Bezel with the brushed-look OEM GT350 boot, can I still replace the lockout on that with this the same way?
I don't see why you wouldn't be able to.
Date published: 2017-04-04
will this work in a GT350? Thanks
The same modifications as it requires in a GT(i.e. cutting the boot/ziptie), or do you have to modify the collar itself?
Date published: 2017-03-24
Will this work with the Ford Racing short throw shifter kit?
This adapter is designed to work with the factory shift knob or any aftermarket shift knob that is designed to be used with the reverse lock out mechanism. It will ONLY work with aftermarket shifters that retain the reverse lock out mechanism.
Date published: 2015-12-31
Will this work with the short throw shifter tri-ax. That you sell for 90$
Yes, it will work on the Steeda.
Date published: 2015-12-19
Complete Your Package