Battery Tray With 1967-1970 Hold Down Holes 1965-1966

CJ's Part Number: BT9
CJ's Low Price:
1508716800 3510
You'll have to use this battery hold down kit for your new updated battery tray.
Battery Hold Down Kit 1967-1970 - This item is a Kit
CJ's Low Price:
Earn 20 RPM Points What's this?
Battery Tray With 1967-1970 Hold Down Holes 1965-1966

Product Description

Battery Tray for 1965-1966 Mustangs that uses updated 1967-1970 Hold Down Holes.

Are you concerned about the battery in your 1965-1966 Mustang moving or slipping? Then consider ordering this Battery Tray with 1967-1970 Hold Down Holes from CJ Pony Parts!

Features and Benefits:
- Cross-Over-Clamp Design
- Premium Quality Material
- Maintains a Properly Fastened Battery

In 1967, Ford switched over to a stronger cross-over-clamp design to better secure the Mustang battery. This 1965-1966 battery tray offers a similar fit the original 1965-66 unit but utilizes the stronger, updated 1967 hold down. You'll be able to stop worrying about your pony's battery shifting or moving with the sturdier, better-supported 1967 hold down. Order this new battery try and some updated hold downs today for your classic pony from CJ's!

Tech Tip: Some modifications will need to be made during install depending on your Mustang's engine size and placement. 
Please Note:
This updated battery tray will use the 1967-1970 hold down kit (BTC3K).

Whether you’re looking for an exterior mirror, wheels and tires, headlights and tail lights or a set of interior upholstery, CJ’s has the parts you need to complete your classic Mustang restoration with ease! CJ’s has the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order this Battery Tray that uses updated 1967-1970 Hold Down Holes for your 1965-1966 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Battery Trays & Hold Downs  

Installation Instructions


Difficulty: Easy

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Battery Tray With 1967-1970 Hold Down Holes 1965-1966 is rated 4.0 out of 5 by 6.
Rated 4 out of 5 by from Great quality, but holes didn't match. I bought this along with the 67-70 hold down kit and was very pleased with the build quality. I'm very glad that this product exists (having the updated hold down offered in the 67-70 models) so overall I'm very pleased with my purchase. However, like many others, the holes on my kit did not match up with the factory holes so I will need to drill out and make new holes for this to work. This is not a big deal to me... especially since I didn't like where the factory holes were in the first place. Overall, this is very sturdy and it comes powder coated so I don't expect this piece to ever rust. Thanks CJ!
Date published: 2017-02-13
Rated 3 out of 5 by from Looks good-didn't fit well Built well but was not a direct bolt in piece. A little modification and drilling was needed.
Date published: 2015-01-08
Rated 3 out of 5 by from Read the 'Tech Tips' carefully on the website! Installed this into a 66 Mustang, 200 cc, 6 cyl to secure the battery as required for PA state inspection. Take the note: the website suggests "some modifications may be necessary". 'Some' turned into 2 hours of grinding and bending, but, does fit. The recommended hold down kit now has the battery safely snug. So this will solve battery hold down issues with original 66 tray but prepared for a possible wrestling match.
Date published: 2017-10-16
Rated 5 out of 5 by from Great replacement Replace a brand new 1965 battery tray that couldn't hold down the battery. This conversion went so well. All of the holes lined up perfectly without any bending. Now I have a battery that will stay in place if things go badly.
Date published: 2017-01-28
Rated 4 out of 5 by from Good part, fits well. Replaced my original tray in my 65 fastback. I was easy to install and fit well. Long-term quality of the material has to be proven.
Date published: 2015-01-08
Rated 5 out of 5 by from Battery Tray for a 1966 Mustang I bought this battery tray during the restoration of my mustang. It fits and looks great.
Date published: 2017-02-16
  • y_2017, m_10, d_21, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_BT9, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 32.75ms

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 115.11ms
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like