Bestop Automatic Running Board Powerboard NX Pair 4-Door Jeep Wrangler JK 2007-2018

Bestop:
7565215

Highlights

  • Sold As A Pair
  • 6-1/4" Wide Running Board
  • Integrated LED Lights
  • Rated At 600 lbs.
MSRP $2,046.84
$1,160.99
You save 43%

Pair of Bestop Powerboard NX Automatic Running Boards for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 4-Door Jeep JK Wranglers.

Has it become a little more difficult for you and your passengers to get in and out of your 2007-2018 4-Door Jeep JK Wrangler after you have lifted it? Then you should really check out this Pair of Bestop Powerboard NX Automatic Running Boards from CJ Pony Parts! These retractable running boards have a Wi-Fi activation method that automatically extends the running boards when you open the door of your JK and then retract after you have closed it again. It also makes installation much easier!

Bestop Powerboard NX Automatic Running Board 7565215 Features and Benefits:
- Electrically powered running boards retract underneath your Jeep when the doors are closed and extends down when the door opens
- Drops down about 6" and extends out 2"
- Full-length boards
- 600-pound load capacity per side
- Powerboard NX features wireless activation components that reduce installation time and effort
- Built-in anti-pinch safety feature senses pressure to prevent the board from retracting on your hand and feet
- Patented high strength, die-cast aluminum linkage built to last in any climate
- OEM quality sealed motors that perform in any weather
- Sturdy 6-1/4” wide aluminum running board features ultra-durable, non-slip, powder-coated surface
- Integrated LED Light Kit mounts to linkage or to body and illuminates board and ground

The NX version of Bestop’s Powerboard utilizes Wi-Fi modules that attach to the door jams of your JK and detect when the doors open or close. These modules communicate wirelessly to a controller that is programmed to operate the boards. This wireless design makes the installation of the Powerboard NX Running Boards much easier and does not require you to remove the door panels or to tap into the factory wiring.

These Powerboard NX Automatic Running Boards from Bestop drop down 6” and extend out 2” to provide you and your passengers with a helping step to get in your JK Wrangler, especially if it is lifted. Each side has a 600 lbs. load capacity thanks to a patented high strength, die-cast aluminum linkage system that is built to withstand any climate. The aluminum running boards are 6-1/4” wide and come in an ultra-durable, non-slip, powder coated surface. For those dark nights or hard to see weather conditions, an integrated LED light kit provides illumination to aid in seeing the steps. And not to worry about your hand or feet getting caught as the steps retract, as they have a built-in anti-pinch safety feature that will sense pressure and prevent them from closing.

Includes:
- (2) Full-length boards
- OEM quality sealed motors
- Controller
- Hardware
- Wiring harness
- Weatherproof connectors
- LED light kit

Are you looking to outfit your Jeep Wrangler or Ford Bronco for the rigors of off-roading? If so, it is best to make sure all aspects of your build are ready for the rigors of the trail prior to attacking the terrain! Before you make any sweeping changes, however, it would be wise to browse through CJ’s collection of Bestop parts and accessories.

Order this Pair of Bestop 7565215 Powerboard NX Automatic Running Boards for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 4-Door Jeep JK Wrangler from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Wrangler years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart