Borgeson Steering Shaft Support; Billet Stainless; 3/4in. ID
You save 29%
Borgeson Steering shaft support bearing. Billet stainless steel. Tapped to receive two 5/
Steering shaft support bearing. Billet stainless steel. Tapped to receive two 5/16in.-18 bolts. Supports all 3/4in. splined and Double-D steering shaft.If more than two joints are used in a steering system, a support bearing must be used to prevent looping and binding. Use of a vibration reducer and two u-joints will also call for a support bearing to be used. A system with a double u-joint and a single u-joint has three flex points and will require a support bearing. Support bearings will work with all 3/4 splined or Double D steering shafts. All billet supports accommodate a 3/4 shaft. Our standard supports are 2-1/2 tall with two 5/16-18 threaded holes in the end for mounting and are available in steel, aluminum, polished aluminum, stainless steel, and polished stainless steel. The 6 cut and weld billet support is available only in steel and can be cut at any angle for a perfect fit.
California Residents: Proposition 65 Warning
Write Your Own Review