Borla Axle-Back Exhaust Kit ATAK 2-1/4" Stainless Steel With 4" Polished Tips Without Active Exhaust Convertible V6/EcoBoost 2015-2020

Borla:
11939
Borla Axle-Back Exhaust Kit ATAK 2-1/4" Stainless Steel With 4" Polished Tips Without Active Exhaust Convertible V6/EcoBoost 2015-2019 is rated 5.0 out of 5 by 1.
  • y_2020, m_7, d_12, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_CBB80, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 146.07ms
  • REVIEWS, PRODUCT

Highlights

  • Stainless Steel Construction
  • 2-1/4" Mandrel Bent Tubing
  • 4" Polished Exhaust Tips
  • Includes Mounting Hardware
MSRP $876.99
$782.99
You save 11%

Borla 2-1/4" Stainless Steel ATAK Axle Back Exhaust Kit with 4" Polished Tips for 2015, 2016, 2017, 2018, 2019 and 2020 Convertible V6 and EcoBoost Mustangs without the Factory Active Exhaust Option.

Get the sound you're looking for out of your 2015-2020 Convertible V6 or EcoBoost Mustang with this Borla 11939 2-1/4" Stainless Steel ATAK Axle Back Exhaust Kit with 4" Polished Tips. The most aggressive exhaust available from Borla, ATAK , or Acoustically-Tuned Applied Kinetics, mufflers are designed to produce the highest possible decibel levels while retaining clarity of sound. Some of the louder exhaust systems tend to develop distortion, but not the Borla ATAK systems.

The polished 4” angle-cut rolled exhaust tips add both functionality and style to your 2015-2020 Mustang. With style in mind, each exhaust tip features an embossed Borla logo.

Installation of your new exhaust kit will be fairly easy. Your factory exhaust pipe will require some cutting prior to the bolt-on installation. No welding, tuning or engine calibrations will be required before and after installation.

Features and Benefits:
- Full stainless steel construction
- Polished 4” angle cut rolled exhaust tips
- Borla logo embossed on each exhaust tip
- 2-1/4” mandrel bent piping
- Very aggressive acoustically tuned design
- Reuses stock exhaust hangers and mounts
- Includes all necessary hardware and instructions for installation
- Easy cut and clamp installation

*Installation does NOT require any welding or tuning/calibration changes.

Please Note: This kit is designed for use with Convertible V6 and EcoBoost Mustangs only. Will not fit 2019 or 2020 EcoBoost Mustangs that are equipped with the Active Exhaust Option from the factory.

Tech Tip: Installation requires cutting of the factory exhaust piping. Once the modifications have been made to the factory exhaust system, Installation is a simple bolt-in procedure.

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Installation Videos

Video Transcript

We’re here with this Borla Atak Axle Back fitting your 2015 through 2017 EcoBoost or V6 convertible. The Atak is Borla's loudest offering for the 2015 through 2017 Mustang. This version here is gonna figure 2015 through 2017 V6 or EcoBoost convertible, but will be a direct replace for your factory mufflers. Borla will require cutting for installation and is made of two and a quarter stainless steel piping with four inch chrome tips. This Borla Atak axle back and other exhaust for your 2015 through 2017 Mustang is available here at CJPonyParts.com.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Awesome These exhaust sound amazing !!!! easy to install .. never done this before, took me about 1h with the right tools. If you own an ecoboost or any other mustang model it is a must !!!!!!!!!!!!
Date published: 2017-07-24
  • y_2020, m_7, d_12, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_CBB80, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.93ms
  • REVIEWS, PRODUCT

will these fit a mustang ecoboost 2015 fastback?

Asked by: Ezra
Use part number 11890 for the fastback.
Answered by: rk cjpp
Date published: 2019-06-12

Will this fit a 2015 mustang v6 with a 3.7

Asked by: Jaime2000
These will only fit if it is a convertible without active exhaust.
Answered by: rk cjpp
Date published: 2019-04-01

It's fit 2015 Ford Mustang Convertible EcoBoost Premium?

Asked by: Kevinec3937
Yes these mufflers will work.
Answered by: rk cjpp
Date published: 2019-02-06

Will this fit a 2018 ecoboost?

Asked by: econate18
Yes.
Answered by: rk cjpp
Date published: 2018-06-26

Will this fit with the 2017 mustang fastback model ?

Asked by: Mark7394
No, this kit is specifically for the convertible model. P/N: CBB82 is the version you would need for the Fastback.
Answered by: CJPP Dave
Date published: 2017-07-28
  • y_2020, m_7, d_11, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_CBB80, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 115.02ms
  • QUESTIONS, PRODUCT