Borla Axle-Back Exhaust System 2-1/2" Touring Dual Exit With 3-1/2" Black Chrome Tips Jeep Wrangler JK 2012-2018
Borla 2-1/2" Dual Exit Touring Axle-Back Exhaust System with 3-1/2" Black Chrome Tips for 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Add aggressive style and a moderate exhaust sound to your 2012-2018 Jeep JK Wrangler with this 2-1/2" Dual Exit Touring Axle-Back Exhaust System with 3-1/2" Black Chrome Tips from Borla. This premium exhaust kit will also enhance your JK's airflow and increase its horsepower!
Features and Benefits of the Borla 2-1/2" Dual Exit Touring Axle-Back Exhaust System with 3-1/2" Black Chrome Tips (11834BC)
- Made out of premium 300-series stainless steel
- Ultra-smooth mandrel bends
- Enhances airflow
- Increases horsepower
- Straight-through baffled design
- Adds Touring exhaust tone
- 3-1/2" black chrome square, rolled angle cut tips
Borla's axle-back is crafted from aircraft-quality 300-series stainless steel and features a straight through baffled design. 2-1/2" mandrel bent piping leads to the Touring muffler with dual exit 2" pipes and 3-1/2" black chrome square, rolled angle cut tips that exit the rear of your JK.
Not every JK owner wants an extremely loud exhaust. However, most agree the factory system just doesn't cut it. Borla offers the Touring axle-back for a slight bump in noise and a healthy bump in horsepower. The high flowing Touring mufflers will give your Wrangler a deep, throaty, yet mellow sound!
Borla exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere.
Order Borla's 11834BC 2-1/2" Dual Exit Touring Axle-Back Exhaust System with 3-1/2" Black Chrome Tips for your 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
This Borla Touring axle back exhaust is made of mandrel bent stainless steel tubing with a high flow muffler, dual tail pipes, and black tips to give your Jeep better sound and performance without being too loud. It's going to be super easy to install, so today we're going to install it using our 2016 Jeep Wrangler.
This axle back exhaust is going to be super easy to install. There's only one 15 millimeter nut holding it on, then you just have to remove the muffler from the two rubber hangers. Remove the 15 millimeter nut on the exhaust clamp. Now we're going to remove this bracket from the rubber hanger on the Jeep. Now we can move to the other hanger. Once both hangers are disconnected, grab on to the muffler and twist it to break it loose from the pipe, then you can pull it off.
With the factory exhaust out of the way, we're going to put the bigger clamp over the over axle pipe. We're going to take the hanger from the passenger side and install it on the muffler. Then put the driver's side into the rubber hanger, then into the over axle pipe. Get the passenger side hanger in place, then tighten down the clamp. Slide the clamp over the inlet pipe, and tighten it with a 15 millimeter socket. Slide a clamp over each tip, and install the tip on the tailpipe, and align it to where you want. Tighten the clamp with a 15 millimeter socket. Repeat the process on the other side, and your installation is finished.
All right, let's hear it. Our Borla Touring axle back exhaust is installed. It looks really good on this Jeep, the black tips match everything we've done to it already. Installation's going to take you about 30 to 45 minutes, and before you know it, you'll be heading off road.