Borla Axle-Back Exhaust System Stainless Steel ATAK 2-1/4" With 4" Polished Tips Without Active Exhaust Fastback V6/EcoBoost 2015-2020

Borla:
11890
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 111.27ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Aggressive Exhaust Tone
  • Stainless Steel Construction
  • Polished Tips
  • Made In The USA
MSRP $876.99
$782.99
You save 11%

Borla 2-1/4" Stainless Steel ATAK Axle Back Exhaust System with 4" Polished Tips for 2015, 2016, 2017, 2018, 2019 and 2020 Fastback V6 and EcoBoost Mustangs without the Factory Active Exhaust Option.

When you drive around in your 2015-2020 Mustang V6 or EcoBoost Fastback, do you like the sound of your stock exhaust note? Or do you wish it was louder, bolder and more aggressive? If so, take a closer look at this Borla 2-1/4" Stainless Steel ATAK Axle Back Exhaust System with 4" Polished Tips from CJ Pony Parts!

Features & Benefits:
- Most Aggressive Exhaust Note Available from Borla
- Mufflers Designed to Produce Highest Possible Decibel Levels While Retaining Sound Clarity: Will Not Sound Distorted
- Made of Stainless Steel with 2-1/4" Mandrel-Bent Piping
- Polished 4" Angle-Cut Rolled Exhaust Tips with Borla Logo Embossed on Each Tip
- Straight-Through Design with No Drone
- Re-Uses Stock Exhaust Hangers and Mounts
- Cut-and-Clamp Installation: Comes with All Necessary Installation Hardware and Instructions
- Made in the USA

This Borla (11890) 2-1/4" Stainless Steel ATAK Axle Back Exhaust System comes with 4" polished exhaust tips that have the Borla logo embossed on each one. This exhaust is designed to provide you with the loudest and most aggressive exhaust note that Borla makes! The included mufflers are designed to produce the highest decibel levels while retaining clarity of sound so you won't have to worry about distortion. This exhaust system is made in the USA out of stainless steel with 2-1/4" mandrel-bent piping. Installation will be a cut-and-clamp process, and the system comes with all of the hardware and detailed instructions you'll need to bolt it onto your Fastback!

Please Note: This exhaust system is designed for use with 2015-2020 Fastback V6 and EcoBoost Mustangs only. Will not fit 2019 EcoBoost Mustangs that are equipped with the Active Exhaust Option from the factory.

*Installation does not require any welding or tuning/calibration changes.

Tech Tip: Installation requires cutting of the factory exhaust piping. Once the modifications have been made to the factory exhaust system, installation is a simple bolt-in procedure.

Order a Borla (11890) 2-1/4" Stainless Steel ATAK Axle Back Exhaust System with 4" Polished Tips for your 2015, 2016, 2017, 2018, 2019 or 2020 Fastback V6 or EcoBoost Mustang without the Factory Active Exhaust Option from CJ Pony Parts20oday!

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.71ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

I have a 2015 fastback V6 and would like to add the Flowmaster Exhaust Resonator Delete X-Pipe Scavenger V6 2015-2017 Flowmaster: 81107 to this axle-back kit. Is it possible?

Asked by: Fred
Yes it is.
Answered by: rk cjpp
Date published: 2019-12-16
  • y_2020, m_7, d_6, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_CBB82, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 147.51ms
  • QUESTIONS, PRODUCT