Borla Cat-Back Exhaust System 3" S-Type Stainless Steel With 4" Carbon Fiber Tips Without Factory Active Exhaust Option GT Fastback 2018-2020

Borla:
140745CF
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 117.03ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Deep, Sporty Muscle Car Sound
  • Stainless Steel Construction
  • 3" Mandrel Bent Piping
  • Made In The USA!
MSRP $2,149.99
$1,918.99
You save 11%

Borla Stainless Steel 3" S-Type Cat-Back Exhaust System with 4" Carbon Fiber Tips for 2018, 2019 and 2020 Fastback GT Mustangs without the Factory Active Exhaust Option.

Give your 2018-2020 Fastback GT Mustang a deeper, sportier exhaust note with this Borla Stainless Steel 3" S-Type Cat-Back Exhaust System with 4" Carbon Fiber Tips that’s now available at CJ Pony Parts! 

Features & Benefits:
- Fits 2018-2020 GT Mustang Fastbacks without Factory Active Performance Exhaust Option
- Straight-Through Design with No Drone
- Deep, Sporty Muscle Car Sound
- Made of Durable T-304 Stainless Steel with 3" Mandrel-Bent Piping
- Includes 4" Carbon Fiber, Intercooled Angle-Cut Quad Exhaust Tips
- Borla Logo Printed on Each Exhaust Tip
- Significantly Lighter Than Factory Cat-Back System
- Utilizes Integral X-Pipe
- Easy Installation: Bolts Directly to Stock Connection Points and Re-Uses Stock Exhaust Hangers and Mounts
- Includes All Necessary Hardware and Instructions for Installation
- Made in the USA 

This Borla (140745CF) Stainless Steel 3" S-Type Cat-Back Exhaust System with 4" Carbon Fiber Tips is designed to fit all 2018-2020 GT Mustang Fastbacks that don’t have the factory Active Performance Exhaust option. It features a straight-through design with no drone and results in a deep, sporty sound that’s reminiscent of a muscle car! This cat-back exhaust is made of strong stainless steel with 3" mandrel-bent piping and comes with 4" carbon fiber tips with a Borla logo printed on each one. This new cat-back is a lot lighter than your factory one and uses an integral X-pipe. Installation is a bolt-on process that uses your stock connection points and re-uses your stock exhaust hangers and mounts. 

Please Note: This system is only for 2018-2020 Fastback GT Mustangs without the Active Exhaust Option from the factory. 

*For 2018-2020 models only. This exhaust will not fit 2015-2017 models regardless of installed valance. 

Tech Tip: If you think this system is slightly louder than you hoped or you’ve made other modifications that increased the volume of your Borla Cat-Back, please see P/N: 60661 for a simple bolt-on optional Borla resonator that can easily make this system quieter. 

Order a Borla (140745CF) Stainless Steel 3" S-Type Cat-Back Exhaust System with 4" Carbon Fiber Tips for your 2018-2020 Fastback GT Mustang without the Factory Active Exhaust Option from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.81ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Will this system fit a 2018 GT with a convertable top ? Or are you required to remove factory support cross member only found on the convertable ? I watched a vidio on a 2017 and they removed the cross member. Not sure if they were able to put back on ?

Asked by: Dave D
This will only fit the fastback, the convertible bracing would interfere.
Answered by: rk cjpp
Date published: 2018-12-13
  • y_2020, m_7, d_7, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_CBB97, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 137ms
  • QUESTIONS, PRODUCT