Borla Intermediate Over The Axle Pipes 2-3/4" GT/GT500 2011-2014
- Made In The USA!
- Stainless Steel Construction
- 2-3/4" Mandrel Bent Piping
- Easy Installation
Borla 2-3/4" Over the Axle Intermediate Pipes for all 2011, 2012, 2013, and 2014 GT/GT500 Mustangs.
The factory exhaust on the 2011-2014 Mustang GT and GT500 is restrictive to say the least. With very tight bends and resonators installed in the factory intermediate pipes, they really try to keep sound levels at a minimum. For some people this may be ideal, but unfortunately while restricting the exhaust flow, you’re also holding back the full potential of your 2011, 2012, 2013, or 2014 Mustang GT or GT500.
Borla has a solution to this problem. Introducing the Borla 2-3/4" Over the Axle Intermediate Pipes for all 2011, 2012, 2013, and 2014 GT/GT500 Mustangs. This is a direct bolt-in replacement for the factory over the axle intermediate pipes. You can retain your stock H-Pipe and Factory Axle-Back mufflers or you can bolt-in in any combination that would normally work with you OEM over the axle intermediate pipes.
- OEM Style Ball and Socket Connection for Mufflers
- Factory Style Slip fit joint for H or X-Pipes
- 2-3/4" Mandrel bent tubing
- 100% Stainless Steel Construction
- Borla Million Mile Warranty
- Made in the U.S.A.
*Includes 2 High Temperature Insulation tubes to protect fuel lines
*Reuses all existing factory Hardware for Installation
So if you're looking to take your exhaust system in your 2011-2014 GT or GT500 Mustang to the next level, look no further and order your Borla 2-3/4" Over the Axle Intermediate Pipes for all 2011, 2012, 2013, and 2014 GT/GT500 Mustangs from CJ Pony Parts today!
California Residents: Proposition 65 Warning
These intermediate over the axle pipes are made of two and three quarter inch diameter stainless steel and are direct replacements for the factory pipes on your '11 through '14 Gt or GT 500. They get rid of the terrible factory bends, but also remove the restrictive factory resonators. Borla's over the axle pipe features the factory ball and socket style connector, it also includes heat shields for your fuel lines.
These stainless steel Borla intermediate over the axle pipes are sold as a pair and are made in the USA.